A network engineer is deploying a Cisco All-Flash HyperFlex solution. Which local storage configuration is required for the operating system and persistent logging?
Answer(s): D
https://www.cisco.com/c/en/us/support/docs/voice/telephony-signaling/212102-Configure-Persistent-Logging-on-Cisco-IO.html
DRAG DROP (Drag and Drop is not supported)Drag and drop the fields for configuring a full state backup file of the Cisco UCS Manager from the left onto the descriptions on the right.Select and Place:
Answer(s): A
An engineer configures an Intersight Virtual Appliance and must claim over 200 targets. The engineer starts the Claim New Target Procedure. The engineer has prepared this initial comma-separated value file to provision the targets:UCSFI,10.1.1.3,user-1,pwd5516b917IMC,10.1.1.5/26,user-2,pwdc65b1c43fHX,10.1.2.1/30,user-3,pwd39913690UCSD,1.1.1.1.user-4,pwd5003e9d5 -Which information must be included in the comma-separated value file to provision the targets?
For each target, add a line containing Target Type, Hostname or IP Address, User Name, and Password. Use the CIDR notation to specify the IP Range. You can add as many lines with these details in the .csv file.
https://intersight.com/help/appliance/getting_started/claim_targets
Which component is disrupted when the Cisco Integrated Management Controller is upgraded on a Cisco UCS Series Server?
Answer(s): C
The CIMC Firmware Update Utility is used to update the firmware versions for host(x86)-based systems for standalone servers. To update the firmware, you must restart the host system to either the Linux operating system or to the EFI prompt. You can use the procedures to update the firmware version using KVM as well.Although the procedure to update the firmware version using Linux, EFI, or KVM is the same, be aware that when you activate the new firmware version, the connection to the CIMC is reset, and the KVM window will close.
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/fwp/user/guide/Firmware_Upgrade_Utility/Using.pdf
Which two configuration settings are available in the Cisco UCS Firmware Auto Sync Server policy? (Choose two.)
Answer(s): C,E
You can use the Firmware Auto Sync Server policy in Cisco UCS Manager to determine wheth-er firmware versions on recently discovered servers must be upgraded or not. With this policy, you can upgrade the firmware versions of recently discovered unassociated servers to match the firmware version defined in the default host firmware pack. In addition, you can determine if the firmware upgrade process should run immediately after the server is discovered, or run at a later time.Following are the values for the Firmware Auto Sync Server policy:* No Action - No firmware upgrade is initiated on the server.This value is selected by default.* User Acknowledge - Firmware on the server is not synchronized until the administrator acknowledges the upgrade in the Pending Activities dialog box.
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/3-1/ b_UCSM_CLI_Firmware_Management_Guide_3_1/b_UCSM_GUI_Firmware_Management_Guide_3_1_chapter_011.html
Post your Comments and Discuss Cisco 350-601 exam prep with other Community members:
Our website is free, but we have to fight against AI bots and content theft. We're sorry for the inconvenience caused by these security measures. You can access the rest of the 350-601 content, but please register or login to continue.