QUESTION: 25 Exam Topic: Network

DRAG DROP (Drag and Drop is not supported)
Refer to the exhibit.

In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:

-R1 must be the active RP.
-R2 must be the backup RP that is used only if R1 is not reachable.

Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Select and Place:

See Explanation section for answer.

Answer(s): A

Explanation:

Reference:

https://community.cisco.com/t5/networking-documents/rp-redundancy-with-pim-bidir-phantom-rp/ta-p/3117191

Reveal Solution Next Question

QUESTION: 26 Exam Topic: Network

An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional, the router must be the active master. Which set of commands must be used to implement the scenario?

feature hsrp
interface vlan100
ip address 10.1.1.2 255.255.255.0
priority 255
preempt
hsrp version 2
hsrp 1000
ip 10.1.1.1
feature-set hsrp
interface vlan100
ip address 10.1.1.2 255.255.255.0
priority 20
preempt
hsrp version 2
hsrp 1000
ip 10.1.1.1
feature-set hsrp
interface vlan100
ip address 10.1.1.2 255.255.255.0
priority 80
preempt
hsrp version 2
hsrp 1000
ip 10.1.1.1
feature hsrp
interface vlan100
ip address 10.1.1.2 255.255.255.0
priority 240
preempt
hsrp version 2
hsrp 1000
ip 10.1.1.1