A customer’s smartphone has been overheating frequently and becoming unresponsive since installing an OS update. A technician has already performed a soft reboot of the device. Which of the following should the technician perform NEXT? (Choose two.)

Roll back the OS update
Update the PRL
Force stop running applications
Enable airplane mode
Perform a factory reset
Run application updates
Reset network settings

Answer(s): A,F

Show Answer Next Question

QUESTION: 42

Joe, a user, cannot read encrypted email messages on a corporate smartphone, but he has been able to read them in the past. A technician restarts Joe's smartphone, but the issue remains. The technician deletes the corporate email account and has Joe re-add it, verifying all settings are correct. Despite these steps, the issue persists.

Which of the following is MOST likely causing the issue?

The certificate is expired.
The TPM is bad.
The phone is not encrypted.
The incorrect mail server is selected in settings.

Answer(s): A

Show Answer Next Question

QUESTION: 43

A user moves a file from one NTFS disk to another NTFS disk. Which of the following describes the changes to the file permissions?

The file has both the source and destination permissions
The file keeps the source permissions
The file permissions have to be set manually
The file receives the destination permissions

Answer(s): D

Show Answer Next Question

QUESTION: 44

A technician has enabled port security on a switchport.

Which of the following BEST describes the effect this will have?

Devices must match a list of allowed MAC addresses before accessing the network.
Devices need to conform to the policies set forth by the MDM software.
Data loss prevention software will be monitoring for data exfiltration on the port.
A firewall is actively monitoring the network traffic using heuristic analysis.

Answer(s): A

Show Answer Next Question

Download PDF Next Page

Viewing page 17 of 64
Viewing questions 65 - 68 out of 701 questions

Post your Comments and Discuss CompTIA 220-1002 exam prep with other Community members:

Comments:

Name:

220-1002 Exam Discussions & Posts
220-1002 AI Verifications

anon on: March 04, 2025
Anyone use the free version to help them pass the test? Can't really afford the pdf version right now.
UNITED STATES

senan on: March 02, 2025
salam bu ne suallardi bele
AZERBAIJAN

HCipher on: February 12, 2025
i can certify for anyone planning to take the exam that these questions are up to date and representative of the actual exam, but i strongly urge you to read, and understand the material as comprehensively as you could ensuring you learned as best as you possibly could. before learning the dumps, as acquiring the certificate without any knowledge gained is a futile endeavor for your career progression and the likes
PORTUGAL

The Professor on: December 21, 2024
Passed the A+ today. Many of these questions are valid but be careful to read your questions first because the answer may change based on the conditions in the question
UNITED STATES

CompTIA on: December 03, 2024
These questions are valid but you can't rely on them. We do not use these questions no more. On god.
UNITED STATES

Jury on: April 10, 2024
i just passed my A+ core 2 today. 4 of my PBQ was exactly the same with this practice test. it6 is really worth understanding all the questions here. big help!! thank you so much!! Aiming for my Sec+ now before 601series expires in July
Anonymous

Marc on: March 14, 2024
This exam dumps is valid in US as of yesterday. I can say that it helped a lot with my exam. A lot of relevant topics.
UNITED STATES

Jacob on: February 12, 2024
This exam is one of the hardest ones. You cannot pass without using these exam dumps. Just an FYI to others, majority of these questions are in the exam.
Italy

GetGo on: August 11, 2023
It was pretty easy to pass this exam with the help of this exam dumps PDF. Free version is not complete. I paid for the full version with 50% sale.
Anonymous

AI Explanation - verified by User1253 on: July 06, 2026
Question 8:
Question 8 asks which rollout strategy best minimizes business downtime when implementing a month-end processing system.
Key options:

Cutover (big bang): switch from old to new in one go; typically causes significant downtime during the switch.

Phased: roll out in stages; downtime is reduced per phase but the total deployment may take longer and complicates integration.

Pilot: deploy to a limited area first; reduces risk but not necessarily the widest downtime impact.

Parallel: run old and new systems side by side for a period; downtime is minimized because business operations can continue on the old system while the new is tested and reconciled.

Why Parallel is best here:

It allows continuous operation during the transition (no single cutover downtime).

Problems can be resolved without halting business processes.

Data reconciliation can occur while both systems run.

Trade-offs: higher cost and effort to maintain two systems temporarily.
Answer: D: Parallel.
Kolkata, India

AI Explanation - verified by umgthan on: June 19, 2026
amazon lightsail
Amazon Lightsail is AWS’s simplified VPS-style service for quickly deploying simple workloads with pre-configured app stacks.
Key points:

Pre-configured stacks: WordPress, LAMP/LEMP, MEAN, Node.js, Magento, Django, etc.

Bundled pricing: fixed monthly plans that include compute, storage, and data transfer.

Extras: managed databases, static IPs, built-in DNS management, snapshots/backups, and firewall rules.

Use cases: small websites, development/test environments, MVPs, hobby projects.

When to choose Lightsail vs EC2:

Choose Lightsail for quick, predictable deployments with minimal configuration.

Choose EC2 when you need granular control, auto-scaling, advanced networking, or large/enterprise workloads.

Example: spin up a WordPress site with a managed database and static IP in minutes.
Want a quick setup walkthrough or a comparison of Lightsail plans?
Fremont, United States

AI Explanation - verified by raman.thulasi71 on: June 25, 2026
Question 299:
The correct answer is C) Agility.
Explanation:

Agility refers to the ability to rapidly provision and deploy cloud resources (compute, storage, database) to support new projects or changes, often in minutes.

Elasticity is about automatically scaling resources to match demand, not just quick deployment.

Cost savings relate to reducing expenses, not deployment speed.

Reliability covers uptime and fault tolerance, not how fast you can deploy resources.

Hyderabad, India

AI Explanation - verified by User9195 on: June 14, 2026
Question 48:
Question 48 explanation:

Correct answers: B and D

Why B works:

- “Attributes needed to segment and categorize customers” is a core input for defining territories. By tagging accounts with relevant characteristics (industry, size, potential, etc.), you can create meaningful territory boundaries that reflect how you market and sell.

Why D works:

- “Average number of customers managed by a sales representative” helps with workload balancing. Designing territories to keep reps’ account loads similar improves coverage and performance.

Why A is not selected:

- “Number of currencies” is a pricing/financial consideration, not a primary factor for defining sales territories.

Why C is not selected:

- “Distance between customer headquarters and their sales representatives” is geographic, but it’s often covered by the segmentation attributes and workload metrics. It’s less foundational than the explicit segmentation criteria and workload balance for territory design.
Bengaluru, India

AI Explanation - verified by User1035 on: June 23, 2026
Question 144:
Answer: D

Why: In a regulated rollout that must stay flexible, a product backlog provides a living, prioritized list of work items, including regulatory or compliance changes. It lets the PMO and team adapt priorities as constraints evolve.

Why not A: A burndown chart shows remaining work over time, not visibility into regulatory constraints.

Why not B: A burnup chart shows scope vs. progress, but it still focuses on metrics rather than explicitly capturing regulatory constraints.

Why not C: A kanban board improves flow and accountability, but it doesn’t explicitly facilitate visibility into regulatory constraints.

How this helps: Represent regulatory requirements and changes as backlog items with clear acceptance criteria, and continuously re-prioritize as regulations evolve, maintaining governance without stalling delivery.

Marupe, Latvia

AI Explanation - verified by User9195 on: June 14, 2026
Question 24:
Question 24 — Correct choices: A and B.

A. Configure a validation rule that tests the Has Line Item and Stage fields for the correct condition.

- Reason: Create a validation rule on Opportunity that requires at least one line item when the StageName is set to Negotiation (e.g., AND(ISPICKVAL(StageName,"Negotiation"), NOT(HasOpportunityLineItems))). This directly enforces the needed condition before advancing the opportunity.

B. Ensure that all sales representatives have access to at least one PriceBook when creating product lines.

- Reason: You must have a PriceBook to create OpportunityLineItems. If users can’t access any PriceBook, they can’t add product line items, preventing the required pre- Negotiation state.
Why not C or D:

C describes auto-creating a line item via workflow, which is brittle and not a reliable pattern for enforcing presence of line items.

D relies on record types/page layouts, which aren’t sufficient by themselves to guarantee that line items exist before moving to Negotiation.

Bengaluru, India

AI Explanation - verified by User6895 on: June 24, 2026
Question 41:
Pregunta 41 pregunta qué servicio de Azure puede usar el modelo preconstruido de recibos en Azure AI Document Intelligence.
Respuesta y explicación:

Respuesta correcta: Azure AI Foundry (A).

Por qué: Los modelos preconstruidos de Azure AI Document Intelligence (como el de Recibos) son accesibles e integrados dentro del portal de Azure AI Foundry. Desde Foundry, puedes usar el tile “Vision + Document”, seleccionar el modelo “Receipts” y ejecutar el análisis sobre una imagen de recibo para extraer datos como el nombre del comerciante, fechas y artículos.

Cómo funciona en la práctica:

1) Abre el portal de Azure AI Foundry. 2) Haz clic en Vision + Document. 3) Elige Receipts (modelo preconstruido). 4) Sube una imagen de recibo y ejecuta el análisis. 5) Obtén datos extraídos (p. ej., merchant name, date, line items).
Por qué las otras opciones no son correctas:

Azure Machine Learning: orientado a entrenamiento y despliegue de modelos personalizados, no específicamente a usar modelos preconstruidos de documentos.

Azure AI Vision: enfocado en análisis de imágenes generales, no específicamente en la extracción estructurada de recibos mediante un modelo preconstruido.

Azure AI Custom Vision: para clasificación/detección de imágenes con entrenamiento personalizado; no proporciona el modelo de recibos preconstruido de Document Intelligence.

Madrid, Spain

AI Explanation - verified by User9195 on: June 14, 2026
Question 34:
Question 34 asks how to keep the first stage of a multi-step process from contributing to forecast.

Correct answers: B and D

Why:

B: Configure the first stage with the Forecast Category set to Omitted. Stages with Omitted are not included in forecast rollups.

D: Assign a probability of 0% to the first stage. If a stage has 0% probability, it won’t count toward forecast regardless of other fields.

Why not A or C:

A (enter $0 amount) doesn’t guarantee exclusion from forecast—forecast uses category and probability, not the amount.

C (override the forecast to $0) is manual and error-prone; automation via category or probability is preferable.

quick steps to implement:

Go to Setup ? Forecasts ? Settings (or Opportunity Stages for your sales process).

For the first stage, set Forecast Category to Omitted (and/or set Probability to 0%).

Save.

If you want, I can walk you through the exact navigation for your org (Lightning vs Classic).
Bengaluru, India

AI Explanation - verified by juris.siksna on: June 27, 2026
Question 397:
Question 397 explanation:

Correct answer: A: Review the risk management plan to identify the response strategy.

Why: When a deadline is at risk due to resource delays, the proper first step is to consult the project’s risk framework. The risk management plan defines how risks are identified, analyzed, and responded to, including escalation paths and predefined response strategies. This ensures you act consistently with the project’s approved approach.

Why not B: Escalation to the sponsor is appropriate only if the risk requires authority beyond the PM or if the plan calls for escalation; it’s not the immediate, defined next step by itself.

Why not C: Fast-tracking tasks from the milestone list is a tactical schedule adjustment, not the correct first action to address the underlying risk.

Why not D: A team meeting can help collaboration, but without applying the predefined risk response, it doesn’t address the formal process for handling the risk.

Next steps after A (brief): update the risk register as needed, apply the identified risk response per the plan, and escalate if the plan requires it.
Riga, Latvia

AI Explanation - verified by User9954 on: June 28, 2026
Question 62:
The correct answer is D — RAID 6.
Reason: RAID 6 uses dual parity, so the array can tolerate up to two drives failing simultaneously without data loss. This provides higher fault tolerance than RAID 5, which can survive only a single drive failure. For comparison: RAID 0 has no redundancy, and RAID 1 tolerates one failed drive per mirrored pair, not multiple simultaneous failures across the array.
Paris, France

AI Explanation - verified by sshuang68 on: June 28, 2026
Question 340:
Answer: C — intent-based APIs

Cisco DNA Center uses intent-based APIs to express high-level business goals and enable the delivery of applications across the network, while also providing analytics to support innovation.

Why not the others:

- A (process adapters) are for bridging specific processes, not for app delivery/analytics. - B (Command Runner) runs CLI commands on devices, not for delivering applications or analytics. - D (domain adapters) handle domain-specific integrations, but the primary mechanism described is the intent-based API layer.
Plano, United States

AI Explanation - verified by User8975 on: June 13, 2026
Question 82:
The correct choices are A and C.

A. Volume discounts: With consolidated billing (via AWS Organizations), usage from all member accounts is combined. That allows AWS to apply volume pricing discounts across the entire organization.

C. One bill for multiple accounts: All charges for the member accounts appear on a single, consolidated bill, simplifying payment and administration.

Why the others are not benefits of consolidated billing:

B. A minimal additional fee for use: There is no extra fee just for using consolidated billing.

D. Installment payment options: AWS billing is generally pay-as-you-go; installment options aren’t a feature of consolidated billing.

E. Custom cost and usage budget creation: Budgeting can be done in AWS Budgets; this isn’t a unique benefit of consolidated billing.

New Delhi, India

AI Explanation - verified by User1833 on: July 04, 2026
Question 12:
I can’t view the image, but here’s the conceptual reasoning behind question 12 and why answer B is correct.

In FortiGate SD-WAN, there are two main zones: Underlay (the physical transport links) and Overlay (the logical paths/tunnels). The Underlay zone is where you place the physical WAN interfaces that provide connectivity.

If the exhibit shows the Underlay zone with no members, that means no physical interfaces have been assigned to Underlay yet. This matches the statement: “The Underlay zone contains no member.”

Why the other options are less accurate:

A: The Underlay zone being “the zone by default” is not a fixed rule; the presence of members depends on configuration, so you can have an Underlay with members or empty.

C: If Underlay is empty, port2 and port3 would either be unassigned or placed into a different context; this statement isn’t reliably inferred from the exhibit.

D: The virtual-wan-link and overlay zones are fundamental parts of SD-WAN and typically cannot be deleted; this option is generally false.

Key concept: Underlay holds physical WAN interfaces; Overlay contains the logical paths and VPNs. If Underlay has no members, that’s exactly what option B describes.
Parabiago, Italy

AI Explanation - verified by User2971 on: June 27, 2026
Question 110:
Question 110 describes a NAT setup with an internal network 10.1.1.0/27 and a public address pool 209.165.201.0/27.

Correct answers: C and D.

Why:

C: The 10.1.1.0/27 subnet is assigned as the inside local addresses. Inside local are the private addresses used on the internal network.

D: Inside source addresses are translated to the 209.165.201.0/27 subnet. This is the inside global pool; internal hosts get translated to addresses in that public subnet as they reach the outside.

Why the other options aren’t correct:

A: It states a one-to-one NAT translation. The scenario describes NAT to a public pool, which typically implies dynamic translation rather than a per-host static one-to-one mapping.

B: The 209.165.201.0/27 subnet is assigned as the outside local address range. Outside local is the address the outside world sees for internal hosts, not the pool used for translation; this option is not accurate for this configuration.

Plano, United States

AI Explanation - verified by User6170 on: June 15, 2026
Question 1:
Question 1 asks for the best way to understand the location, use, and importance of personal data within an organization.
Why A (By analyzing the data inventory) is the right approach:

It creates a centralized view of all data assets: where personal data is stored, what types exist, and who has access.

It reveals data flows and purposes, helping you see why data is collected and how it’s processed.

It supports compliance activities (legal bases, retention, subject rights) and risk assessments (vendor risk, cross-border transfers).

It informs privacy governance and security planning (minimization, access controls, retention schedules).

Why the other options are less suitable on their own:

“Testing the security of data systems” focuses on controls, not the data’s location and purposes.

“Evaluating methods for collecting data” concentrates on collection practices rather than the broader data lifecycle.

“Interviewing employees tasked with data entry” provides anecdotal insight but isn’t a comprehensive view of data holdings or flows.

So the best single step to understand the organization’s personal data landscape is to conduct a thorough data inventory (data mapping). Note: some exam banks contain incorrect keys—focus on principles from IAPP objectives: data inventory is foundational.
Curitiba, Brazil

AI Explanation - verified by User8492 on: June 20, 2026
Question 56:

Answer: No (B)

Why the solution doesn’t meet the goal:

The problem is a long-running, HTTP-triggered function that times out after about four minutes. Merely enabling Always On on an App Service plan doesn’t remove this timeout or ensure blob processing completes.

Best practice is to decouple long-running work from the HTTP trigger. Instead, pass the HTTP trigger payload into a queue (Azure Service Bus or Storage Queue) and return an immediate success response to the caller. A separate function, triggered by the queue, processes the blob data asynchronously.

This approach avoids timeouts, improves reliability, and scales better. It also aligns with the guidance to break large functions into smaller, cooperating units and to use asynchronous patterns (e.g., queue-triggered processing or, optionally, Durable Functions for orchestrations).

Key concept:

Don’t perform lengthy processing inside an HTTP-triggered function. Use asynchronous processing via queues or durable workflows.

Pune, India

AI Explanation - verified by User8237 on: July 07, 2026
Question 2:
You're right—Finland means User2 does not meet the Left side of the rule.
Updated takeaway for User2:

Left side (usageLocation in ["US","AU"] AND department == "Sales" AND NOT (jobTitle == "Manager")) cannot be true for a user in Finland.

The only way to include User2 is if the Right side is true: jobTitle == "SalesRep".

So, User2 is added to the group only if their jobTitle is SalesRep. If not, they are not included.
What I need to finalize for you:

What is User2’s jobTitle (and, if possible, the jobTitles for User1 and User3)?

If none have SalesRep, then none would be added unless they meet the Left-side conditions (US/AU location, Sales department, not Manager).

Share the jobTitle data and I’ll pinpoint exactly who belongs.
Rozendaal, The Netherlands

AI Explanation - verified by User5696 on: July 08, 2026
Question 9:
Here’s a focused explanation of Question 9.
What the question asks

You need to assign Fabric workspace roles to two groups:

- ResearchReviewersGroup1 must read lakehouse and warehouse data and shortcuts by using SQL endpoints. - ResearchReviewersGroup2 must read lakehouse data by using Lakehouse Explorer.
Key concepts

Fabric lakehouse workspace roles: Admin, Member, Contributor, Viewer.

SQL endpoints are used for programmatic data access (queries) against lakehouse data.

Lakehouse Explorer is the UI for browsing lakehouse data.

Why the mapping matters

SQL endpoints access (group 1): To run SQL queries against lakehouse/warehouse data, you generally need a role that allows data querying beyond just viewing UI. In practice, that means Contributor or higher (Admin/Member also have broad rights; Viewer is typically limited to reading data via SQL analytics in tables, not full lakehouse/query capabilities).

Lakehouse Explorer access (group 2): To view data in the Lakehouse Explorer UI, a Viewer level access is usually sufficient; you don’t need write permissions.

What the page shows vs. likely correct mapping

The page’s answer key shows:

- Group1 = Viewer - Group2 = Contributor

This is likely incorrect for group 1, because reading lakehouse data via SQL endpoints typically requires Contributor or higher, not just Viewer. Group 2 would more likely be Viewer (to read data in the Lakehouse Explorer UI) rather than Contributor.

Recommended mapping based on requirements

ResearchReviewersGroup1: Contributor (or higher) so they can read lakehouse/wa
Bengaluru, India

AI Explanation - verified by User7840 on: June 28, 2026
Question 148:
Question 148 asks which migration strategy is best to modernize and convert a monolithic application into microservices and move it to AWS.

Correct answer: Refactor (D)

Why: Refactoring involves re-architecting the application to decompose it into independent microservices. This aligns with the goal of moving from a monolith to microservices, enabling independent deployment, scaling, and maintenance.

Why others aren’t correct for this goal:

- Rehost (lift-and-shift): moves the app with minimal changes, preserving the monolithic architecture. - Replatform: makes some cloud optimizations but still keeps a monolith. - Repurchase: replaces the app with a different product (often SaaS), not microservices.
High-level AWS approach after refactoring (conceptual):

Decompose into services with clear boundaries.

Deploy per-service using containers or serverless (e.g., ECS/EKS/Fargate or Lambda).

Use API Gateway for service exposure and potentially a service mesh like App Mesh for communication.

Implement per-service data stores and resilient communication, with CI/CD pipelines (CodePipeline, CodeBuild).

If you want, I can walk through how to apply this with a sample monolith-to-microservices decomposition.
Dakar, Senegal

AI Explanation - verified by User8086 on: June 22, 2026
Question 27:
Reasoning for Question 27:

Goal: analyze complaints by the date and use a built-in date hierarchy. Power BI needs a real date type column (not text) to expose Year/Quarter/Month/Day.

The Logged values are text like “2018-12-31 at 08:59,” so you must isolate the date portion first.

Why option C is correct:

Split the Logged column by the delimiter " at ". This yields a new column with just the date string, e.g., "2018-12-31".

Convert that date string column to the proper Date type. Once it’s a Date, Power BI automatically provides the built-in date hierarchy.

What you would do in Power Query Editor (brief steps):

In Power Query Editor, select the Logged column.

Use Split Column by Delimiter (delimiter: at ) to create a column containing 2018-12-31.

Change the type of that new column to Date (or DateTime if you prefer time granularity).

Optional: remove the original Logged column or the extra time column.

Other options are less effective because:

A: “Parse” isn’t a standard one-step fix for creating a date type here.

B: Directly changing to Date fails due to the extra text and time.

D: A static example won’t produce a usable date column for analysis.

Basildon, United Kingdom

AI Explanation - verified by User6170 on: June 15, 2026
Question 5:
Resposta correta: B.
Por quê: O cenário mostra que Jacob, o responsável pela privacidade, precisava revisar os requisitos de privacidade junto à equipe de produto, mas não participou do processo de desenvolvimento. No framework de privacidade por design (privacy by design/default), questões de privacidade devem ser consideradas desde as primeiras fases do ciclo de vida do sistema (SDLC). Ao não incluir esse passo de colaboração precoce com a equipe de privacidade, os requisitos legais e de proteção de dados podem ficar inadequadamente incorporados ou ausentes.
Observação útil:

Embora o usuário tenha que marcar um consentimento de marketing para usar o app (ou seja, A), isso não demonstra que as práticas de privacidade foram integradas no desenvolvimento.

As opções C e D não refletem etapas-chave do SDLC de privacidade; C refere-se a um marco desatualizado (Privacy Shield), e D sugere uma funcionalidade específica, não uma etapa de desenvolvimento.

Curitiba, Brazil

AI Explanation - verified by User8575 on: July 04, 2026
Question 163:
Question 163 asks about the responsibilities of Snowflake’s Cloud Service layer (the control plane). The correct choices are A, B, D:

A. Authentication – Cloud Services handles user authentication and session management.

B. Resource management – It manages resource provisioning, concurrency, and coordination across warehouses.

D. Query parsing and optimization – The Cloud Service layer parses SQL and builds execution plans.

Why the others are not part of Cloud Services:

C. Virtual warehouse caching – Caching happens in the compute/virtual warehouse layer.

E. Query execution – Actual query execution is performed by the virtual warehouses (compute layer).

F. Physical storage of micro-partitions – Storage layer holds data; Cloud Services does not store data.

Big picture: Cloud Services is the control plane that coordinates authentication, metadata, access control, resource management, and query planning/optimization. The compute layer (virtual warehouses) executes the plans, and the storage layer holds the data.
Indore, India

AI Explanation - verified by cyberexus on: June 18, 2026
Question 27:
For Question 27, the best choice is B: capacity analysis of IT operations.
Why:

Capacity analysis assesses current resource utilization and forecasts future demand, helping determine whether IT resources (people, hardware, software, facilities) are sufficient to meet business needs. This directly evaluates the effectiveness of IT resource planning.

Why the others are less appropriate:

A. Budget execution status shows spending against budget, not whether resources are adequate or planned appropriately.

C. Succession plan for key IT personnel focuses on continuity of personnel, not overall resource planning effectiveness.

D. A list of new applications to be implemented describes future initiatives, not whether resource planning has properly anticipated needs.

So, capacity analysis provides the most direct evidence of whether IT resource planning is effective.
Kyiv, Ukraine

AI Explanation - verified by User3879 on: June 24, 2026
yes please
Here’s how to map question 103 to the simulator’s site-to-site VPN configuration.

Identify the two VPN concentrators (left and right in the UI).

1) Phase 1 (IKE)

IKE: select IKEv2

Encryption: AES-256

Integrity: SHA-256

DH Group: Group 14 (2048-bit) or the highest strong group available

Authentication: Pre-Shared Key (PSK) and enter the same secret on both ends

2) Phase 2 (IPsec/ESP)

Transform: ESP (IPsec)

Encryption: AES-256

Integrity: SHA-256

PFS: enable; use the same DH group as Phase 1 (e.g., Group 14)

3) Traffic and tunnels

Local network: your side subnet (e.g., 192.168.1.0/24)

Remote network: opposite side subnet (e.g., 192.168.2.0/24)

Tunnel mode / route all traffic: enable to ensure “All traffic is encrypted over the VPN”

4) Misc

NAT-T: enable if either end sits behind NAT

Lifetime/rekey: use typical values (e.g., 28800s Phase 1, 3600s Phase 2) if the UI allows

Apply/save on both ends. If you share the exact subnets shown in the simulator, I’ll map them precisely.
Cebu City, Philippines

AI Explanation - verified by User7000 on: June 29, 2026
Question 41:
The correct answer is AWS CloudTrail (A).
Why:

CloudTrail records AWS API calls made in your account, including who made the call, when it happened, where it came from, and the request parameters. This creates an auditable log of account activity for governance and compliance.

The other options don’t focus on auditing API calls:

- AWS Trusted Advisor provides best-practice checks and optimization recommendations. - Amazon Inspector is a security assessment service for EC2 workloads. - AWS X-Ray traces requests through applications, not AWS account API activity.
Tip: For auditing, you typically enable a CloudTrail trail (potentially across regions) and store logs in S3, with optional CloudWatch Logs integration for alerts.
Dakar, Senegal

AI Explanation - verified by User8710 on: June 12, 2026
explain in PL
Pytanie 42 brzmi: „Która grupa uprawnien sluzy do kontrolowania dostepu do Aplikacji i Modulów?”

Prawidlowa odpowiedz: Roles (Opcja C)

Dlaczego:

Role to grupa uprawnien przypisana uzytkownikowi, która okresla, jakie aplikacje i moduly sa widoczne w Nawigatorze Aplikacji.

Access Control Rules (ACL) kontroluja dostep do danych w tabelach/rekordach, a nie widocznosc modulów.

UI Policies kontroluja zachowanie formularzy i prezentacje interfejsu, nie uprawnienia dostepu.

Assignment Rules automatycznie przypisuja zadania, a nie kontroluja dostepu.

Czyli to rola uzytkownika decyduje o widocznosci aplikacji/modulów.
Warsaw, Poland

AI Explanation - verified by Kavya.Haglur on: June 25, 2026
Question 10:
Question 10 explains how a new user is placed in SharePoint Site1.

The missing fill is that User1 becomes “a member of Site1” (i.e., a site member with rights on Site1).

Why: When a new internal user is created, they’re automatically added to the tenant group “Everyone except external users.”

The group has Edit permissions on Site1, so the new user inherits those rights immediately without any manual invitation.

Access method: User1 can reach Site1 via its URL right away.

Key points to remember:

Automatic group membership applies to new internal users.

Inherited permissions from the group grant site access without individual invites.

This behavior assumes Site1 uses the default permission model (not a unique-permissions site).

Caution: If Site1 were configured with unique permissions or if external-sharing settings differ, the outcome could change. If you want, I can walk through the other questions too.
Bengaluru, India

AI Explanation - verified by User8952 on: June 27, 2026
Question 20:
Answer: D and E — Azure Cognitive Search and Azure App Service

Why: Provisioning a QnA Maker resource typically creates an App Service to host the QnA API/UI, and it also provisions a Cognitive Search service to enable fast search over the knowledge base.

Why not the others:

- Language Understanding, Azure SQL Database, and Azure Storage are not automatically created as part of the standard QnA Maker provisioning in RG1.

How to verify: In RG1, list resources and look for an Azure App Service (host) and an Azure Cognitive Search service. This confirms the two automatically created resources.

Kolkata, India

AI Explanation - verified by User5811 on: June 29, 2026
Question 7:
Here’s how to reason through Question 7.

Requirements recap:

- Use custom domains - Each web app needs 10 GB of storage - Each app runs on dedicated compute instances - Load balancing between instances is included - Minimize cost

Tier options and key differences:

- Free/Shared: not suitable for production with dedicated compute and custom domains (they use shared compute and have limitations on custom domains). - Basic: provides dedicated compute and supports custom domains, but is limited in scale (fewer instances) and may have tighter storage/scale limits. - Standard: provides dedicated compute with more instances, built-in load balancing, supports custom domains, and greater storage options. More suitable for multi-app production scenarios and scalable workloads at a reasonable cost.

Why Standard (the given answer) fits:

- It guarantees dedicated compute and includes load balancing across multiple instances. - It supports hosting multiple apps under one plan with custom domains. - It offers more headroom (scale and storage) than Basic while typically costing less than Premium options, aligning with “cost minimized” given the need to host 10 apps.

Important caveats (for real-world sizing):

- Ensure the chosen plan tier and size provide enough total storage for all apps (not just per-app). You may need a larger Standard tier (or multiple plans) to meet the 10 GB per app requirement.
In short: Standard is the right balance of required features (custom domains, dedicated compute, load balancing) and cost for hosting multiple apps, per the exam key. If you want,
Borehamwood, United Kingdom

AI Explanation - verified by User6244 on: June 23, 2026
Question 17:
Question 17: A developer wants to deploy an application quickly on AWS without manually creating the required resources. Which AWS service will meet these requirements?

Correct answer: AWS Elastic Beanstalk (B)

Why:

Elastic Beanstalk is a platform-as-a-service that automates provisioning of underlying resources (EC2, load balancer, auto-scaling, etc.) and handles deployment. You upload your code and Beanstalk sets up and manages the environment.

AWS CodeBuild (C) builds code as part of CI, but doesn’t automatically create and manage the full deployment environment.

Amazon EC2 (A) requires manual resource setup and configuration.

AWS Personalize (D) is for ML recommendations and not relevant to deploying generic apps.

Tip: Beanstalk speeds deployment by abstracting away infrastructure provisioning, though for more control or repeatable environments you might use CloudFormation or CDK.
New Delhi, India

AI Explanation - verified by User2380 on: June 26, 2026
Question 6:
Question 6 asks why you’d see “Prompt not found” when opening a shared Copilot prompt from another company. The page shows the answer as C, but that seems questionable.

The answer key says: The prompt contains a reference to a file you do NOT have access to (C).

In my view, the more likely cause is: The prompt is outside of your organization (B). Copilot prompts are typically tenant-bound; sharing a prompt link across tenants is often blocked by cross-tenant restrictions or requires explicit licensing/configuration. If the external tenant hasn’t granted access or your organization’s policies block external prompts, you’d get a not-found or access-denied result.

Why B fits better:

Cross-tenant restrictions block external prompts from loading.

Licensing and prompt privacy settings can prevent access to externally shared prompts.

The error message aligns with access/app policy rather than a specific file reference.

Bottom line: The provided key says C, but the most plausible explanation is B (prompt is outside your organization) due to tenant restrictions and access controls.
Hyderabad, India

AI Explanation - verified by User3609 on: June 13, 2026
Question 2:
Here’s an explanation for Question 2.
Answer: E — An Apex Trigger that creates Apex Managed Sharing records based on the junction object’s relationships.
Why E fits:

The scenario requires users within the same Account hierarchy to see containers related through a junction object (Contacts linked to Department Accounts). That’s a data-sharing problem, not just a UI filter.

Apex Managed Sharing lets you programmatically grant (and revoke) access to specific Container records based on the relationships defined in the junction object. This can be driven by insert/update on the junction object, ensuring only the appropriate department users see the relevant containers.

Other options don’t solve the underlying access-control requirement:

- A Visualforce page with without sharing would expose data inappropriately. - A Custom List View on the junction object filters data for viewing but doesn’t grant or enforce cross-record visibility. - A Custom Report Type and a report are for viewing data, not controlling live access in the community. - A Lightning Component on the Home Page is UI-focused and relies on the existing sharing model rather than implementing dynamic sharing rules.
Implementation sketch:

Create a Container__Share record for each Container__c to grant access to the appropriate User/Group based on the Junction__c relationships.

Use an after insert/update trigger on Junction__c (or a Queueable job) to maintain shares as relationships change.

Use RowCause and AccessLevel appropriately to reflect intended permissions.

Note: The given key shows C, but the correct approach for this access requirement is E.
Jaipur, India

AI Explanation - verified by User8249 on: June 14, 2026
Question 1:

Correct answer: C — Databricks web application

Why: In the classic Databricks architecture, the control plane hosts the management and user-facing components, including the Databricks web application (the UI you use in a browser). The data plane runs the actual compute and storage for notebooks and jobs (i.e., the driver node and worker nodes). Other options are tied to the data plane or external systems:

- Worker node and Driver node are compute resources in the data plane. - JDBC data source is an external data source or connector, not a control-plane service. - Databricks Filesystem (DBFS) relies on underlying storage and interacts with the data plane.

Quick takeaway: The web UI is a control-plane service; compute and storage components reside in the data plane.

Pune, India

AI Explanation - verified by User5786 on: July 02, 2026
Question 67:
Question 67 asks: In a FAT32 system, a 123 KB file will use how many sectors?
Key idea:

A file occupies whole clusters. The number of clusters = ceil(file_size / cluster_size).

Sectors per cluster = cluster_size / 512 (since a sector is typically 512 bytes).

Total sectors used = clusters × sectors_per_cluster.

So the exact number depends on the volume’s cluster size.

Examples with common FAT32 cluster sizes (assuming 1 KB = 1024 bytes, 1 KB = 2 sectors of 512 bytes):

Cluster size = 4 KB (4096 bytes):

- clusters = ceil(125,952 / 4,096) = 31 - sectors/cluster = 8 - total sectors = 31 × 8 = 248

Cluster size = 8 KB (8192 bytes):

- clusters = ceil(125,952 / 8,192) = 16 - sectors/cluster = 16 - total sectors = 16 × 16 = 256

Cluster size = 1 KB (1024 bytes):

- clusters = ceil(125,952 / 1,024) = 123 - sectors/cluster = 2 - total sectors = 123 × 2 = 246
Conclusion:

The exact number depends on the volume’s cluster size. For common FAT32 sizes, you’d expect about 246–256 sectors. The options 34, 25, 11, or 56 don’t align with standard FAT32 calculations, so the listed answer (B) is likely incorrect.

Kampala, Uganda

AI Explanation - verified by User4762 on: July 06, 2026
In italian
Ecco la logica della Domanda 1, in italiano, con le scelte di storage mode:

Box 1: Cliente ? Dual: Dual permette di servire i dati dalla cache quando possibile o eseguire query on-demand sull’origine dati. Poiché Customer deve essere aggiornato quotidianamente, vuoi visuali rapide (cache) ma anche dati freschi se necessario.

Box 2: Dimensioni (Customer, Geography, Date) ? Dual: Usare Dual sulle tabelle dimensionali principali riduce le relazioni limitate e migliora le prestazioni, pur consentendo query dirette quando serve freschezza.

Box 3: Vendite ? DirectQuery: DirectQuery non è cached; le query vanno direttamente al data source, garantendo dati quasi in tempo reale.

Box 4: SalesAggregate ? Import: Import mantiene i dati in cache e supporta un refresh settimanale, ottimizzando le visualizzazioni.

Riassunto: Dual per le dimensioni, DirectQuery per i fatti quasi real-time, Import per l’aggregato settimanale per prestazioni migliori. Nota: mescolare le modalità può influire su prestazioni e supporto delle funzionalità.
Genoa, Italy

AI Explanation - verified by User9484 on: June 20, 2026
Question 64:
Question 64 explanation:

Scenario: 2,500 users have Office 365 Enterprise E3 licenses assigned individually. You assigned E5 to a group containing all users and need to remove E3 with minimal effort.

Why B is correct: Use Set-MsolUserLicense to remove the E3 licenses from all users (e.g., via -RemoveLicenses "O365_E3"), effectively revoking the old license while preserving the new E5 license from group licensing. This directly handles license removal at scale.

Why the other options aren’t ideal:

- A: The Administrative Units blade controls admin scope, not license removal. - C: The Groups blade is for assigning licenses to a group, not for removing licenses from users. - D: Set-WindowsProductKey is irrelevant to Office 365 licensing.

Quick note: In practice you’d script the removal for all users (often with a Get-MsolUser pipe into Set-MsolUserLicense) to remove E3 while keeping E5 from the group.

Johannesburg, South Africa

AI Explanation - verified by User5343 on: June 16, 2026
Question 2:

Correct answer: Dataverse

Why:

The project management app built with Power Apps in Teams typically uses Dataverse as its data backing. Power BI has a dedicated Dataverse connector to read those tables directly.

The other options aren’t the primary data source for a Power Apps app:

- Microsoft Teams Personal Analytics is for Teams usage analytics, not app data. - SQL Server database would apply only if the app stored data there. - Dataflows are for data preparation/ETL, not the live source for the app’s data.
How to connect (high level):

In Power BI Desktop, choose Get Data > Dataverse.

Sign in, select the environment, then pick the tables used by the app.

Decide between Import or DirectQuery based on refresh needs (DirectQuery can provide near-real-time access; Import caches data).

Key concept:

Use the Dataverse connector when your Power Apps data lives in Dataverse to simplest and most direct access from Power BI.

Sydney, Australia

AI Explanation - verified by bhavanaammanamanchi on: June 26, 2026
Question 25:
Short answer: It’s not prompt injection. The scenario describes a hallucination/fabrication by the model, not an attack where the user injects a prompt to force a different behavior.
Why not prompt injection:

Prompt injection involves manipulating the input to override system prompts or cause the model to reveal hidden instructions or perform actions it shouldn’t. The question’s scenario does not show any attempt to override Copilot’s prompts or safeguards.

Instead, the model generated plausible-sounding but ungrounded information from web data. This is a classic case of hallucination (also termed fabrication in some contexts), where the output isn’t grounded in the provided data or real facts.

Key terms:

Hallucination: generating content that is not grounded in data or facts.

Fabrication: the model invents numbers/details when it lacks exact information.

Prompt injection: an adversarial prompt technique to alter the model’s behavior.

So, the correct concept is hallucination/fabrication, not prompt injection.
Hyderabad, India

AI Explanation - verified by Hitmanhm on: June 22, 2026
Question 61:
Kurz gesagt: Die richtige Antwort ist B.
Warum B sinnvoll ist:

Ziel ist es, die SQS-Backlog pro Instanz zu reduzieren, nicht nur Gesamtauslastung wie Netzwerkin oder CPU zu betrachten.

Wenn das backlog pro Instance hoch ist, sollten mehr Instanzen bereitgestellt werden, damit die Messages schneller abgearbeitet werden.

Wie man es umsetzt (Kernpunkte):

Verwende CloudWatch-Metrik-Mathematik, um den backlog pro Instanz zu berechnen.

Metriken:

- ApproximateNumberOfMessagesVisible aus der SQS-Warteschlange (sichtbare Nachrichten). - Anzahl aktiver EC2-Instanzen in der ASG (z. B. GroupInService oder GroupTotalInstances aus AWS/AutoScaling).

Ausdruck (Beispiel): backlog_per_instance = ApproximateNumberOfMessagesVisible / GroupInService.

Richte eine Target-Tracking-Policy mit dieser benutzerdefinierten Metrik als Zielwert ein (z. B. gewünschter backlog pro Instanz). So reagiert Auto Scaling dynamisch in Echtzeit.

Warum nicht A, C oder D:

A nutzt ApproximateNumberOfMessagesDelayed, das spiegelt verzögerte Nachrichten wider, nicht den aktuellen Backlog pro Instanz.

C und D (Step/Simple Scaling) verwenden feste Schwellenwerte und balancieren den Load pro Instanz nicht automatisch aus.

Prüm, Germany

AI Explanation - verified by User7592 on: June 17, 2026
Question 1:
Question 1 asks: which Azure support plans allow you to open new support requests.
Key concept:

Basic plan: free, but does not include technical support incidents. You generally cannot open new technical support requests under Basic.

Paid plans (e.g., Developer, Standard, Professional Direct, Premier): include technical support and allow new support requests to be opened.

So, the correct approach is: include all the non-Basic paid plans—Developer, Standard, Professional Direct, and Premier. Basic should be excluded.
Note: The page shows “Answer(s): A.” Without seeing the exact option list, I can’t confirm mapping. If option A lists exactly the four paid plans (Developer, Standard, Professional Direct, Premier) and excludes Basic, then A is correct. If not, the key may be incorrect.
Mumbai, India

AI Explanation - verified by User3253 on: June 13, 2026
Question 2:
For Question 2, the correct choices are A and E.

A) Authentication — The Cloud Services layer handles system-wide services like authentication and access control.

E) Metadata management — It also manages metadata (object definitions, query history, optimization info).

Why not the others?

B) Query processing is done by compute/virtual warehouses, not the Cloud Services layer.

C) Secure socket relates to encryption/network security, not a Cloud Services function.

D) Virtual warehouse hosting is part of the compute layer, not Cloud Services.

Chennai, India

AI Explanation - verified by User9933 on: June 22, 2026
Question 1:
Here’s the explanation for Question 1.

Correct answer: A

Why:

The Snowball Edge appliance is provided for a defined rental window, and the use of the device for the initial period (commonly up to 10 days) is included at no additional cost as part of the job.

The other options involve data transfers or extended usage, which are charged separately under Snowball pricing. Specifically:

- Transferring data to the device (data movement into the Snowball) and transferring data from the device to Amazon S3 are billed according to Snowball data transfer pricing. - Daily use of the appliance after the initial period (beyond 10 days) incurs ongoing charges.
In short, the only no-cost activity among the choices is the 10-day appliance usage. If you want, I can elaborate on the pricing details for the other data-transfer scenarios.
Dakar, Senegal

AI Explanation - verified by User9430 on: June 26, 2026
next questions please
I can’t generate new practice questions here, but I can walk through the questions on this page and explain the answers. For more questions with verified answers, the premium/full version offers the full question bank.
Here’s a quick review of 65–72 with corrected notes where needed:

Q65: Which type of interface enables you to display multiple performance analytics, reporting and other widgets on a single screen?

- Answer: Dashboard. Why: dashboards host multiple widgets and analytics on one screen.

Q66: What are the three components of a filter condition?

- Answer: Field, Operator, Value. (Table is not part of the 3 core components.)

Q67: Configuration will not affect what others see on their forms.

- Answer: False. Config changes can affect all users who view that form.

Q68: What displays a set of records from a table?

- Answer: List. A list shows multiple records from a table.

Q69: A User is stored in which table?

- Answer: sys_user.

Q70: A group is stored in which table?

- Answer: sys_user_group.

Q71: What are the 6 methods available for user authentication?

- Answer: Local, Multifactor, LDAP, SAML 2.0, OAuth 2.0, Digest Token (all six).

Q72: A role is recorded in which table?

- Page shows: Role[sys_user], but the correct table is sys_user_role.
If you want, tell me which question you want explained in more detail
Sacramento, United States

AI Explanation - verified by guilherme-rps on: July 01, 2026
Question 22:
The correct choice is B (AAA).

What RADIUS does: Provides Authentication, Authorization, and Accounting (AAA) for centralized access control to network resources (VPNs, wireless, switches, etc.).

Why this fits:

- Authentication verifies user identity. - Authorization determines what the user is allowed to do. - Accounting logs the user’s session data (start/stop times, duration, resources used).

Why the others are incorrect:

- A) CIA are broad security objectives (confidentiality, integrity, availability), not specifically implemented by RADIUS. - C) ACLs are per-device access filters, not a centralized AAA service. - D) PEM refers to Privacy-Enhanced Mail or certificate formats, not a RADIUS AAA solution.

Quick example: A user connects to the corporate Wi-Fi; RADIUS authenticates credentials, authorizes access rights, and logs the session for accounting.

Santos, Brazil

AI Explanation - verified by singh_y2k on: June 11, 2026
Question 26:

Answer: No. The solution does not meet the goal.

Why:

Azure Information Protection (AIP) is for protecting documents and emails (data at rest/in transit) using encryption/rights management. It is not a secrets or credential management tool.

To protect administrative credentials during automated deployment, you should use a secrets management service such as Azure Key Vault. Store credentials as secrets, and have your deployment automation retrieve them securely at runtime (e.g., via a Managed Identity or a service principal with least-privilege access).

Benefits of Key Vault approach: prevents hard-coding secrets in scripts, enables rotation, and provides auditing/monitoring of access.

How you’d implement (high level):

Create a Azure Key Vault and store admin credentials as secrets.

Assign a managed identity to your deployment tooling (or use a service principal) with access to the needed secrets.

Update deployment scripts to fetch credentials from Key Vault at deployment time.

Rotate credentials regularly and monitor access via Azure activity logs.

So, the correct choice is B: Azure Information Protection isn’t the right tool for encrypting credentials in deployment. Use Azure Key Vault (with managed identities) instead.
Kuala Lumpur, Malaysia

AI Explanation - verified by User6736 on: June 30, 2026
Question 3:
Question 3 asks how to give a user access to view a dashboard inside a specific app without allowing them to create or save lenses. The correct action is:

Assign the Viewer role to the user.

Why:

The requirement is read-only access within the designated app. The Viewer role provides view-only access.

The Editor role would enable creating/saving lenses, which violates the requirement.

The Manager role also implies broader permissions beyond viewing.

The Use Analytics permission alone enables analytics usage but does not control per-app lens creation capabilities.

Note: The answer key on the page lists C (Use Analytics permission), but to meet the “view only, no lens creation” requirement, assigning the Viewer role (B) is the correct approach.
Delhi, India

AI Explanation - verified by juris.siksna on: June 27, 2026
Question 396:
Question 396 scenario: A hybrid project (predictive for the bridge, agile for the software) faces delays due to lack of information. The best action is B: Make work visible using Kanban boards.
Why: Kanban boards visualize work items, status, and bottlenecks, making information gaps visible and helping the team manage flow. This supports both the predictive and agile parts of the project by signaling what’s blocked and where decisions or information are needed.
Why the other options are weaker here:

A. Increasing retrospectives helps process improvement but doesn’t directly address the immediate information gaps causing delays.

C. Incorporating small batches is useful in agile but doesn’t specifically surface or manage the information bottlenecks.

D. Lean manufacturing isn’t appropriate for software development and doesn’t target information flow issues.

If you want, I can walk through how to set up a Kanban board for this project and what metrics to track.
Riga, Latvia

AI Explanation - verified by User7197 on: June 20, 2026
Question 37:
Answer: A
Explanation:

Why A is correct: Publishing the on-prem web apps via Microsoft Entra Application Proxy applies a Zero Trust approach to remote access. It lets users reach the apps without exposing the internal network or requiring a VPN, and leverages Entra ID for SSO and conditional access, MFA, and centralized identity control. This minimizes the attack surface while meeting Zero Trust principles and aligns with the MCRA guidance for securing on-prem resources.

Why not B: Using VPN with Entra authentication still relies on a network gateway (VPN) and increases attack surface. It doesn’t inherently provide the same cloud-style access controls, SSO, or MFA-based policy enforcement for web apps as App Proxy.

Why not C: Configuring connectors/rules in Defender for Cloud Apps (Cloud App Security) focuses on SaaS and cloud app discovery/monitoring, not directly on securely publishing and access-controlling on-prem web apps.

Why not D: Defender for Endpoint web protection addresses endpoints, not access control for on-prem web applications.

Key alignment: App Proxy enables secure, identity-driven access, removes the need for inbound VPN, supports SSO/MFA, and centralizes access management—core tenets of Zero Trust in the scenario.

Kuala Lumpur, Malaysia

AI Explanation - verified by User8072 on: June 15, 2026
Question 14:
Question 14 explanation:

Correct answer: D) Out-of-band management

Why: Out-of-band (OOB) management provides a dedicated, separate path to a device for admin tasks, even if the device’s normal operating system hasn’t started. It lets you access the console, view POST/ BIOS messages, and perform recovery or power-cycle actions remotely.

Why the others aren’t as suitable:

- Crash cart: physical visit to retrieve hardware or power-cycle a device; not remote. - Jump box: an intermediate remote host; still requires the device’s management path to be reachable. - Secure Shell (SSH): requires an active OS and running SSH service; not available if the device hasn’t started.

Quick troubleshooting approach:

- Connect via the device’s management interface (serial console or dedicated management port) using an out-of-band system. - Use console access to view boot messages, troubleshoot POST issues, and, if needed, initiate a recovery or power cycle. - If available, use IPMI/ILO/DRAC to manage power or retrieve logs.
Pretoria, South Africa

AI Explanation - verified by User4394 on: June 16, 2026
Question 3:
Question 3 asks which filter option to use on a Cortex XSIAM dashboard widget when you want data filtered by more than one dynamic value.

Answer: B — Multi-select.

Why: The Multi-select filter lets you choose multiple dynamic values for a widget, enabling the visualization to show data that matches any or all of those selected values (depending on the widget’s configuration). This is essential when you want to explore data across multiple criteria at once.
What the other options do:

Free text/number: filters by arbitrary text or numeric input, not constrained to predefined dynamic values.

Fixed filter: filters by a single, fixed value.

Single-select: filters by only one dynamic value at a time.

Example: If you want a widget to show events from multiple hosts (hostA, hostB, hostC), use Multi-select to select all three hosts.
Hyderabad, India

AI Tutor 👋 I’m here to help!

CompTIA 220-1002 Exam Actual Questions (Retired and replaced with 220-1201) (Page 17 )

QUESTION: 41

QUESTION: 42

QUESTION: 43

QUESTION: 44

CompTIA 220-1002 Exam Actual Questions
(Retired and replaced with 220-1201) (Page 17 )