PRINCE2 PRINCE2 Re-Registration Exam Prep
PRINCE2 Re-Registration (Page 9 )

• B — AWS DataSync: Transfers data between storage systems. It is not a marketplace or integration service for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit stores source code, not third-party analytical datasets. Kinesis is for streaming data, not retrieving datasets from repositories.
• D — Kinesis Data Streams and ECR: Amazon ECR stores container images, not third-party datasets.

1. x = -100
2. -100 < x < 100
3. 100 = x < 1000
4. x = 1000

• -500 ? class 1
• 0 ? class 2
• 100 ? class 3
• 1000 ? class 4

• Identifies which user or department owns the device
• Supports inventory and compliance requirements
• Enables tracking of lost, stolen, retired, or unauthorized devices
• Helps enforce security controls such as mobile-device management and secure configuration

• Unrestricted data mining: Data mining is not automatically a privacy violation. It becomes an issue when personal data is collected or used improperly.
• Identity theft: This is a possible consequence of inadequate privacy protection, but it is not the central focus of privacy regulations.
• Human rights protection: Privacy can be considered a human right, but this option is broader than the specific regulatory focus.
• Identifiable personal data: Regulations such as HIPAA focus directly on controlling the collection, use, disclosure, and protection of personal information.

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

text 
user<TAB>action<TAB>status

text 
user|action|status

• Colons: Although colons commonly appear in log data, they are not a supported delimiter choice in the FX workflow described by this exam question.
• Spaces: Spaces are not treated as a supported delimiter for this extraction method; ordinary text often contains variable spacing.

• Physical: Protects facilities or equipment, such as locks and security cameras.
• Technical: Uses technology, such as firewalls, encryption, or access controls.
• Operational: Covers day-to-day actions and processes, such as training, backups, or incident response.
• Managerial: Includes policies, standards, risk assessments, and procedures.

• Repetitive and time-consuming
• Based on measurable conditions, such as last check-in time
• Easy to automate with alerts, dashboards, or scheduled reports
• Important for ensuring scan coverage

• Assigning custom recommendations usually requires analyst judgment and context.
• Analyzing false positives can sometimes be assisted by automation, but validation often requires human review.
• Rendering an additional executive report increases reporting activity rather than reducing a core operational workload.

• STIX: A standardized format for exchanging cyber-threat intelligence.
• OVAL: A language and framework for describing and assessing system vulnerabilities and configuration issues.
• Threat intelligence feed: Provides current indicators or threat information, but is not specifically a reference for common application exploitation techniques.
• CVE: A catalog of publicly disclosed vulnerabilities, identified by unique CVE numbers.

CIMA P3 topics

• IT governance and systems strategy
• Systems development and implementation
• Change and project governance
• Strategic and business risk

• A — Plan for new systems: The committee should help identify and prioritise systems requirements and ensure planned systems support organisational needs.
• D — Consider competitive issues: New information systems may affect Y’s competitive position, service quality and efficiency. These strategic implications should be considered.
• E — Ensure the system meets company goals: This is a key governance responsibility. The committee should ensure the project remains aligned with Y’s objectives and delivers business value.

• B — Develop new systems: Detailed system development should be performed by IT specialists and project teams, not the steering committee.
• C — Manage the project: The project manager should handle day-to-day project management. The steering committee should provide oversight, challenge and key decisions, rather than manage daily activities.

Box 1: No

• configure_azure_monitor() configures Azure Monitor and the OpenTelemetry pipeline.
• LangChain requires its own instrumentation or callback tracer, such as AzureAIOpenTelemetryTracer.
• You must pass the tracer to the LangChain execution configuration so chains, tools, prompts, and model calls become spans in Application Insights.

Box 2: Yes

text 
OTEL_SERVICE_NAME=customer-agent 
OTEL_SERVICE_NAME=invoice-agent

• Correct exam answer: A — HKEY_LOCAL_MACHINE
• The relevant location is associated with HKEY_LOCAL_MACHINE\SAM.
• The SAM does not store passwords in plain text; it stores password hashes.

• HKEY_CURRENT_USER contains settings for the currently logged-in user, not the account-password database.
• HKEY_USERS contains user profiles and settings loaded for users.
• HKEY_CURRENT_CONFIGURATION contains hardware/profile configuration information.

• Where to find the TiMOS runtime image
• Which configuration file to load
• The IP address and related settings for the CPM management Ethernet port

• A: User authorization is configured in the router’s security configuration, not primarily in the BOF.
• C: Hardware initialization is performed by the boot process and system software.
• D: The system date and time are configured separately, often through NTP or CLI settings.

• AB’s own PPE: $100m
• CD’s PPE in its individual accounts: $50m
• Fair value uplift at acquisition: $40m
• Remaining useful life: 10 years
• Extra depreciation each year: $40m ÷ 10 = $4m
• Four years’ extra depreciation to 31 December 20X4: 4 × $4m = $16m
• Remaining fair value uplift: $40m - $16m = $24m

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• The message came from the claimed sender (authentication)
• The message was not altered (integrity)
• The sender cannot easily deny sending it (non-repudiation)

• Attackers can send unsigned phishing emails.
• Attackers may compromise a legitimate account and send signed malicious emails.
• Users may still be tricked by a validly signed message.

• Sustainability
• Performance efficiency
• Reliability

• On VirtualNetworkA: enable Allow gateway transit.
• On VirtualNetworkB: enable Use remote gateways.

Statement 1 — Correct

Statement 2 — Correct

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

bash 
OTEL_SERVICE_NAME=foundry-agent

bash 
OTEL_SERVICE_NAME=langchain-service

python 
import os 


os.environ["OTEL_SERVICE_NAME"] = "langchain-service" 


from azure.ai.openai... # import your tracing components 
from azure.monitor.opentelemetry import configure_azure_monitor 


configure_azure_monitor( 
    connection_string=os.environ["APPLICATIONINSIGHTS_CONNECTION_STRING"] 
)

• Agent application: OTEL_SERVICE_NAME=foundry-agent
• LangChain application: OTEL_SERVICE_NAME=langchain-service

• A — Windows 11 with Azure CLI installed: Yes

• D — Chrome OS using Azure Cloud Shell: Yes

• E — Windows 10 with the Azure PowerShell module installed: Yes

• B — Linux with only Azure CLI: No, because the option does not state that PowerShell is installed.
• C — macOS with PowerShell Core only: No, because it does not state that Azure PowerShell modules or Azure CLI are installed.

• Document feeder: A scratch, dirt, or debris on the feeder glass or rollers can create a line on every scanned image.
• Pickup rollers: Move paper through the printer; they would not normally create a scanner-only line.
• Corona wire: Affects toner charging and would cause defects on printed output.
• Drum assembly: Also affects printed pages, so faxes and computer print jobs would show the line too.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized activity. They do not physically prevent the activity, but they may influence behavior.
• Detective control: CCTV detects or records activity so security personnel can identify incidents and investigate them later.

• Preventive: Stops an incident from occurring, such as a locked door.
• Corrective: Restores systems after an incident, such as backups.
• Directive: Instructs people what to do, such as security policies or warning instructions.
• Compensating: Provides an alternative control when the preferred control cannot be used.

• Determine risk tolerance: Tolerance defines how much variation or exposure the organization is willing to accept. Scenarios may help apply tolerance, but they do not primarily determine it.
• Determine risk appetite: Risk appetite is established at an enterprise or governance level. Scenarios help compare risks with the appetite; they do not normally establish it.
• Develop risk responses: Once risks are identified and assessed, scenarios support response planning. However, response development comes later.

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

• Scanning is not essential during a power outage.
• A scanner can consume UPS battery power without helping the user save cloud documents or shut down safely.
• The UPS should be reserved for the computer, monitor, and necessary network equipment.
• The surge protector helps protect the scanner from voltage spikes, but it will not keep it running during an outage.

• Act as the default gateway for devices in that VLAN
• Route traffic between different VLANs
• Provide management access to the switch

text 
interface vlan 10 
 ip address 192.168.10.1 255.255.255.0

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

• FTP — Transfers files using a client/server model and supports authentication. It uses separate control and data connections.
• TFTP — A very simple file-transfer protocol with no authentication and minimal features. Commonly used to transfer router or switch configuration files and IOS images.
• SCP — Securely copies files over SSH. It provides encryption and authentication.
• SFTP — Also transfers files securely through SSH, but provides more file-management capabilities than traditional SCP.
• HTTP/HTTPS — Primarily web protocols, but can also download files; HTTPS encrypts the session.

• TFTP = simple, unauthenticated file transfer
• FTP = file transfer with authentication, but not inherently encrypted
• SCP/SFTP = secure file transfer using SSH

1. It examines the source MAC address and learns it on the incoming port.
2. It examines the destination MAC address.
3. If the destination MAC is already in the MAC/CAM table, it forwards the frame only through the associated port.
4. If the destination MAC is unknown, it performs unknown-unicast flooding:

• Dark web: A place where leaked credentials may be sold or shared, not usually the original source.
• Threat feeds: Collections of intelligence about threats, not a typical leakage source.
• State actors: A type of attacker, not an accidental corporate disclosure source.
• Vulnerability databases: Track known vulnerabilities, rather than leaked credentials.

• PC A: 192.168.1.10/24
• PC B: 192.168.2.10/24

• Both PCs have a correct default gateway
• A router or Layer 3 switch connects the subnets
• Routing and firewall rules allow the traffic

• Partners first log in to the corporate portal, which uses the shared SAML Identity Provider.
• When they select a Salesforce link, the IdP can send a SAML assertion directly to Salesforce.
• Salesforce validates the assertion and grants access to the Partner Community without requiring another login. This is IdP-initiated SSO because authentication begins outside Salesforce.

• SP-initiated SSO starts when Salesforce sends an authentication request to the IdP. That would be appropriate if users began by visiting Salesforce.
• The Web Server and User Agent OAuth flows are for OAuth authorization, not browser-based SAML federation between an IdP and Salesforce.

• Custom domains: Supported by Basic and higher tiers.
• Dedicated compute: Basic and Standard use dedicated virtual machine instances; Free and Shared use shared infrastructure.
• Load balancing between instances: Standard provides scaling across multiple instances with load balancing.
• Storage: Standard provides more storage than Basic.
• Cost: Standard is the least expensive option that satisfies all the stated requirements.

• Free/Shared: Use shared compute and have limited features; they don’t meet the dedicated-compute requirement.
• Basic: Provides dedicated compute and custom domains, but does not provide the required Standard-level multi-instance capabilities in the exam’s feature comparison.

• Labels control access and protection, not blanket exclusion.
• If the user has permission to open a labeled file—especially if the label allows authenticated users to view it—Copilot can use that file in a summary.
• If the label applies encryption and the user lacks the required usage rights, Copilot should not use the file or reveal its contents.
• Copilot honors the user’s existing permissions, so it should not expose labeled content to an unauthorized user.

1. Open Notepad as Administrator.
2. Open:

1. Remove or correct the line mapping the website to the wrong IP address.
2. Save the file.
3. Optionally run:

cmd 
   ipconfig /flushdns

• Product recall: Premature before confirming a violation or assessing risk.
• Notify the regulatory authority: May be required later, especially if the discrepancy affects safety or compliance, but first investigate and verify the facts.
• Inform production: Not the initial regulatory assessment step; production may become involved if a packaging or manufacturing error is identified.

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• MFA adds an additional authentication factor, such as a phone notification or verification code.
• It helps prevent unauthorized sign-ins, even if a password is compromised.
• It does not encrypt, store, or protect credentials used by deployment processes.

• B: Extending credit to customers increases receivables, so more cash is tied up in working capital.
• C: Replacing obsolete inventory does not reduce the overall inventory investment; it simply changes its composition.
• D: Paying suppliers earlier reduces payables. This uses cash and therefore increases the funds tied up in working capital.

• 50% memory utilization baseline: The environment can be provisioned with excess capacity, leaving room for growth and workload spikes.
• Storage scalability: Cloud storage can generally be expanded as needed without redesigning the physical platform.
• Single circuit failure resilience: A properly designed IaaS provider uses redundant power circuits and infrastructure, so failure of one circuit should not take the platform offline.

• A — Dual PDUs: Helps with power redundancy but does not provide storage scalability.
• C — Network load balancing: Provides network-path resilience, not memory or storage scalability, and does not address a power-circuit failure.
• D — Multiple NAS devices: May improve storage capacity, but does not inherently provide power resilience or the required compute-capacity baseline.

• A: Concerns task scheduling and avoiding missed runs, not directly sizing the warehouse.
• B: The amount of data in a stream alone does not reliably determine compute needs; the SQL processing is what matters.
• D: A multi-cluster warehouse addresses concurrency, not the compute size needed for one task execution.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Moving the risk’s financial impact to a third party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity that creates the risk.

• Reconnaissance: Gathering information about the target.
• Weaponization: Creating or combining a malicious payload with a delivery method.
• Delivery: Sending the payload, such as through phishing.
• Exploitation: Triggering a vulnerability or weakness to gain execution or access.

• Data source: Folder
• Transformation: Remove the Content column (or keep only the file-metadata columns)

Why

• File name
• Extension
• Date modified
• Folder path
• Content — the binary contents of the file

• CSIRT: A team that responds to and manages security incidents.
• CVSS: A scoring system for rating the severity of vulnerabilities.
• SOAR: A technology platform for automating and coordinating security operations and incident response.

xml 
<apex:page> 
    <apex:stylesheet value="{!URLFOR($Resource.MyStyles, 'styles/main.css')}" /> 
</apex:page>

• <apex:includeScript> is for JavaScript.
• <apex:includeStyle> is not a valid Visualforce component.
• <apex:require> is not the Visualforce tag used to load CSS.

• C — Before update
• D — Before insert

apex 
trigger AccountTrigger on Account (before insert, before update) { 
    for (Account acct : Trigger.new) { 
        acct.Description = 'Updated automatically'; 
    } 
}

• In after insert and after update, Trigger.new records are read-only.
• Use after triggers when you need the record’s final database Id or want to create/update related records.
• Attempting to change a field directly in an after trigger causes a read-only error.