Salesforce ADX261 Exam Prep
Service Cloud Administration in Lightning Experience (Page 5 )

• B — Sales staff will tender for riskier contracts:

• C — Sales staff will encroach on other territories:

• D — Sales staff will look for new jobs:

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized activity. They do not physically prevent the activity, but they may influence behavior.
• Detective control: CCTV detects or records activity so security personnel can identify incidents and investigate them later.

• Preventive: Stops an incident from occurring, such as a locked door.
• Corrective: Restores systems after an incident, such as backups.
• Directive: Instructs people what to do, such as security policies or warning instructions.
• Compensating: Provides an alternative control when the preferred control cannot be used.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized or malicious activity. They do not directly stop the action; they influence behavior.
• Detective control: CCTV records or monitors activity so security personnel can identify events or investigate them afterward.

• Preventive: Stops an incident from occurring, such as access control.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: An alternative control used when the preferred control is not feasible.

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

• File1 contains the evaluation configuration—for example, evaluators, test data, thresholds, or evaluation parameters.
• The GitHub Actions workflow must reference that file through the evaluation-config input so the action knows which evaluation to run.
• project-endpoint identifies the Microsoft Foundry project, but it does not identify the evaluation definition. It is also typically required, but it does not answer the specific requirement about using File1.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• LastName: Required.
• FirstName: Optional.
• AccountId: Optional; a Contact may be associated with an Account later or remain private, depending on organization settings.
• Name: A compound display field made from first and last name; it isn’t entered as a separate field.

• IKE (Internet Key Exchange) negotiates the IPsec security association, including:

• ESP (Encapsulating Security Payload) protects the data after negotiation by providing encryption and optionally authentication.
• AH provides authentication and integrity but does not encrypt traffic.
• TLS is used for protocols such as HTTPS, not for negotiating IPsec parameters.

Box 1: No

• configure_azure_monitor() configures Azure Monitor and the OpenTelemetry pipeline.
• LangChain requires its own instrumentation or callback tracer, such as AzureAIOpenTelemetryTracer.
• You must pass the tracer to the LangChain execution configuration so chains, tools, prompts, and model calls become spans in Application Insights.

Box 2: Yes

text 
OTEL_SERVICE_NAME=customer-agent 
OTEL_SERVICE_NAME=invoice-agent

• The Azure DevOps (Boards only) connector is designed specifically for Azure DevOps Analytics views.
• It authenticates directly to Azure DevOps and lets you select an existing Analytics view.
• Filters defined in the Analytics view are applied by Azure DevOps before Power BI retrieves the data, reducing the amount of data transferred.

• Azure DevOps Server (Boards only) is for on-premises Azure DevOps Server.
• OData Feed can consume OData endpoints, but it is not the dedicated Azure DevOps Analytics-view connector.
• OData queries are not the intended dedicated connector for this requirement.

spl 
error AND host=WWW3 
status=404 OR status=500 
NOT source=access.log

• Quotation marks are used for exact phrases or values containing spaces.
• Parentheses group parts of a Boolean expression, but they are not required for every Boolean search.

• Vulnerability scanner: Identifies technical weaknesses in systems, applications, or devices.
• Penetration test: Simulates attacks to determine whether vulnerabilities can be exploited.
• SCAP (Security Content Automation Protocol): Uses standardized formats and protocols for automated vulnerability, configuration, and compliance checks.
• Illumination tool: Maps and analyzes broader supply-chain exposure and third-party risk.

• A. Continue using the current system: It will eventually fail and offers no recovery strategy.
• B. Virtualize the entire system: Correct. A VM can preserve the old OS, application, settings, and dependencies while running on newer physical hardware.
• C. Containerize the application: Containers generally share the host OS kernel and are not suitable for preserving an entire incompatible legacy OS.
• D. Clone the disks to USB: A disk clone may provide backup or temporary recovery, but it does not solve hardware compatibility or provide a reliable long-term platform.

• Technical platform interfaces: Important for integration and interoperability, but they should support—not drive—the architecture.
• Scalability of the network: Valuable as the organization grows, but a scalable solution is ineffective if it does not meet business or security needs.
• Development methodologies: Relevant to implementation, but they do not define the organization’s fundamental security requirements.

• Low: Applies system, tenant, and user-based suppressions. Activity from locations commonly used by that user is more likely to be suppressed.
• Medium: Applies system and user suppressions.
• High: Applies only system suppressions, so more unusual-location activity generates alerts.

• Enforce organizational rules, such as allowed regions or required tags
• Audit resources for compliance
• Deny noncompliant deployments
• Aggregate compliance results across subscriptions

• Outer packet: 10.5.1.1 > 52.165.16.154
• IPv4 protocol field: 41, which indicates IPv6 encapsulation
• Inner packet: IPv6 traffic between 2001:... addresses

• MAC address spoofing: Changes Layer 2 addressing; it does not explain the IPv6-in-IPv4 structure.
• Steganography: Hides data inside files or media, not visibly in a tunneled protocol.
• Broken encryption: No evidence of encryption being cracked.
• On-path sniffing: Involves intercepting traffic, not sending data to an external host.

• CPU: Number of virtual CPUs and, where applicable, CPU reservations.
• Memory: Amount of memory and memory reservations.

• Network interface: Usually configured through the VM or workload networking configuration.
• PCI devices: Specialized hardware and not a standard VM Class resource in this context.
• Storage: Typically selected through storage policies or the VM’s storage configuration.

• Case Assignment Rules normalmente são avaliadas quando o caso é criado. Elas podem ser executadas novamente em uma edição somente se o usuário marcar “Assign using active assignment rules”; isso não acontece automaticamente apenas porque o caso foi fechado.
• Portanto, criar uma regra de atribuição não corrige os centenas de casos já fechados e não garante, por si só, que um caso será transferido antes de ser fechado.

• B — Usar uma ferramenta de dados: corrige os registros históricos já existentes, atualizando o Owner.
• D — Criar uma regra de validação: impede que um caso seja fechado enquanto ainda pertence a uma fila. Exemplo conceitual: se Status = Closed e o proprietário for uma fila, bloquear o salvamento.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Lead investigator: Coordinates the investigation and directs the response.
• Information security representative: Provides security expertise and helps assess the incident.
• Technical representative: Preserves system evidence, takes forensic backups, and supports technical analysis.
• Legal representative: Advises on legal, regulatory, privacy, and evidence-handling requirements.

1. Initiation

1. Planning

1. Execution

1. Monitoring and controlling

1. Closing

• How quickly the vendor must respond to incidents or requests
• Availability or uptime requirements
• Resolution time targets
• Performance expectations and penalties for failing to meet them

• SOW (Statement of Work): Describes the work, deliverables, scope, and schedule.
• MOA (Memorandum of Agreement): Documents an agreement in which parties commit to specific responsibilities.
• MOU (Memorandum of Understanding): Records a general intention to cooperate; it may not be legally binding.

• Espionage: Stealing confidential information, often for a competitor or foreign entity.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A cyberattack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or services used outside IT oversight.

• Determine the project budget — Budget development is a separate cost-management activity.
• Develop a communication plan — This belongs to project communications planning, not schedule completion.
• Establish baselines — Baselines are created after the schedule and related plans have been developed and approved. They formally capture the approved plan.

• Marketing users: Dynamic Forms can show all fields.
• Support users: Field visibility rules can display only the Support preference fields on the record page.
• Reporting: Both profiles can still report on all fields because Dynamic Forms controls page visibility, not the underlying field access.

• A — Two record types and page layouts: Page layouts can control field placement and editability, but they are less flexible for conditional field visibility and would not be the best fit here.
• C — Muting permission set: Permission-set muting is used with permission-set groups; it does not conditionally hide fields on a page.
• D — Field-Level Security: FLS would remove field visibility at the security level. If fields are hidden by FLS, users generally cannot report on or access those fields, conflicting with the requirement that both users report on all data.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.

• True positive: The scan reports a vulnerability that really exists.
• False positive: The scan reports a vulnerability that does not exist.
• True negative: The scan correctly reports no vulnerability.
• False negative: The scan fails to detect a vulnerability that is actually present.

• Render thousands of animation frames
• Generate product images in multiple sizes
• Apply filters or transformations to a large image collection
• Produce visual effects for a video

• Determine risk tolerance: Tolerance defines how much variation or exposure the organization is willing to accept. Scenarios may help apply tolerance, but they do not primarily determine it.
• Determine risk appetite: Risk appetite is established at an enterprise or governance level. Scenarios help compare risks with the appetite; they do not normally establish it.
• Develop risk responses: Once risks are identified and assessed, scenarios support response planning. However, response development comes later.

• Microsoft manages the physical datacenter, hardware, and virtualization.
• You manage the virtual machine’s operating system, installed software, configuration, and data.
• You choose the VM size, storage, networking, and scaling options.

• SaaS: You consume a complete application managed by the provider, such as Microsoft 365.
• PaaS: You deploy applications without managing the underlying operating system or VM infrastructure, such as Azure App Service.

• B — Notify affected business units: Notification should follow an initial determination of scope and impact; otherwise, the organization may communicate incomplete or inaccurate requirements.
• C — Assess noncompliance risk: Risk assessment requires understanding the regulation’s requirements first.
• D — Inform senior management: Management should be informed, but with a clear summary of the regulation’s impact, risks, and recommended actions.

• A user connects with their Google account.
• Google associates the user’s SSH key with that identity.
• IAM roles determine whether they can log in.
• Access can be tied to a specific employee for auditing.
• Removing the IAM role removes their login access.

• compute.osLogin: regular OS login access
• compute.osAdminLogin: OS login with administrative privileges, typically including sudo

text 
enable-oslogin=TRUE

• A. Remove rows where Sales[Status] is Canceled

• E. Remove Sales[Canceled Date]

• B: Removing Sales_Date would remove information users need—the date portion.
• C: Changing Delivery_Time to Integer could alter its meaning or precision and is not necessarily safe.
• D: Splitting the date/time column creates additional columns rather than simply removing unnecessary data.

• Data Cloud combines data from multiple systems.
• It resolves and organizes that data into a unified customer view.
• That unified view enables downstream actions such as personalized campaigns, segmentation, analytics, and activation.

• A = core platform value
• D = a resulting business use case or benefit

• Input validation: Prevents malicious or malformed input within an application; it does not authenticate a software package.
• Secure cookies: Protect web-session cookies; they do not protect downloadable software.
• Fuzzing: Tests software by supplying unexpected input to find vulnerabilities; it does not verify software integrity.

• Windows 11 Pro ? Windows 11 Enterprise
• Windows 10 Pro ? Windows 10 Enterprise

• Reduce the training data: Usually makes overfitting worse.
• Add hyperparameters: Hyperparameters already control training; simply adding them does not solve the problem. Proper tuning could help, but that is not what the option states.
• Increase training time: More training can worsen overfitting if the model is already memorizing the training data.

• Deterministic approve/reject results
• Strict adherence to predefined rules
• Consistent, reproducible outcomes
• Auditability and regulatory compliance

• 50% memory utilization baseline: The environment can be provisioned with excess capacity, leaving room for growth and workload spikes.
• Storage scalability: Cloud storage can generally be expanded as needed without redesigning the physical platform.
• Single circuit failure resilience: A properly designed IaaS provider uses redundant power circuits and infrastructure, so failure of one circuit should not take the platform offline.

• A — Dual PDUs: Helps with power redundancy but does not provide storage scalability.
• C — Network load balancing: Provides network-path resilience, not memory or storage scalability, and does not address a power-circuit failure.
• D — Multiple NAS devices: May improve storage capacity, but does not inherently provide power resilience or the required compute-capacity baseline.

• Record changes — a flow can start when a record is updated or otherwise changes.
• Schedules — a flow can run at a specified date/time or on a schedule.
• Record inserts — a flow can start when a new record is created.

• Subflows are reusable flow components called by another flow; they are not normally trigger types.
• Record views do not generally initiate a Flow Designer flow.

• Authentication: Verifies who the user is.
• Authorization: Determines what the authenticated user is allowed to access.
• Accounting: Records activity such as login times and resource usage.

• CIA: Confidentiality, integrity, and availability—the three core security goals.
• ACL: Access Control List, which defines permitted or denied traffic or access.
• PEM: A certificate and key encoding format, not the primary function of RADIUS.

• Unrestricted data mining: Data mining is not automatically a privacy violation. It becomes an issue when personal data is collected or used improperly.
• Identity theft: This is a possible consequence of inadequate privacy protection, but it is not the central focus of privacy regulations.
• Human rights protection: Privacy can be considered a human right, but this option is broader than the specific regulatory focus.
• Identifiable personal data: Regulations such as HIPAA focus directly on controlling the collection, use, disclosure, and protection of personal information.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• Prevention costs – costs incurred to stop defects occurring, such as staff training, quality planning and supplier evaluation.
• Appraisal costs – costs of checking whether products meet standards, such as inspection, testing and quality audits.
• Internal failure costs – costs of defects found before delivery to customers, such as scrap, rework and retesting.
• External failure costs – costs of defects found after delivery, such as warranty claims, returns, complaints and product recalls.

• Customers may boycott V’s products.
• Supermarket customers may stop buying from V.
• Investors may view V as having higher legal, ethical and reputational risk.
• V could face fines, lawsuits, contract losses and higher costs.
• Expected future profits may fall.

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

• Where to find the TiMOS runtime image
• Which configuration file to load
• The IP address and related settings for the CPM management Ethernet port

• A: User authorization is configured in the router’s security configuration, not primarily in the BOF.
• C: Hardware initialization is performed by the boot process and system software.
• D: The system date and time are configured separately, often through NTP or CLI settings.

• A Screen Flow can present a form that inspectors complete and submit on an Experience Cloud page.
• It can collect inspection findings, validate the input, and create or update records.
• An Autolaunched Flow has no user interface, so it cannot directly provide the form.
• A Related List only displays related records, and Record Detail is primarily for viewing or editing an existing record—not for a custom inspection submission form.