SDI SD0-302 Exam Actual Questions
Service Desk Manager Qualification (Page 7 )

• Answer: D: Making business cases for improvement action

• Continual Improvement focuses on identifying and planning improvements and ensuring they’re funded and prioritized. Creating a business case for an improvement action is part of justifying and obtaining support/resources to implement improvements.
• A (Identifying the cause of incidents) aligns with Problem Management.
• B (Authorizing changes) aligns with Change Enablement.
• C (Logging/managing incidents that result in improvement opportunities) aligns with Incident Management, not Continual Improvement.

• Version control provides a single source of truth for metadata changes and tracks every modification.
• It supports branching and merging, so each feature can be developed in isolation and later merged without overwriting others.
• It allows diffs and conflict resolution, making it easier to manage dependencies across features and ensure a stable release.

• Setup Audit Trail: only logs who/change when something happened; it doesn’t prevent overwriting or manage cross-feature dependencies.
• Change Sets: used to deploy changes between orgs, not to coordinate parallel development or prevent conflicts across ongoing sprints.

• Coordinate and manage the assessment team
• Assign assessment activities
• Direct interviews, examinations, and tests
• Ensure the assessment follows the CAP

• Answer key: Lead Assessor — likely wrong
• CAP-based answer: C3PAO

• Correct choices: A and D.

• Why not B, C, or E?

• According to the provided answer key, the four options are: Upload File, User Criteria, HR Profiles, HR Criteria (options B, D, F, G).

• Upload File: Filter by a file you upload (e.g., CSV) that provides data for bulk case creation.
• User Criteria: Filter by criteria related to users (e.g., role, department) to select target users.
• HR Profiles: Filter by HR profile data associated with users.
• HR Criteria: Filter by HR-related criteria or attributes.

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

• Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.
• Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.
• Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

• What the scenario asks: You have a Power BI semantic model that pulls from multiple sources (Azure SQL Database and SharePoint Online), must support a single dataset for three reports, keep data current (daily refresh by 7 AM PT), and apply RLS to limit sales data by region. You need to choose a storage mode for the tables.

• Correct choice: Dual storage mode.

• Why Dual fits:

• Key concepts:

• D. Provide public endpoints to store and retrieve data

• E. Manage the infrastructure layer and the operating system

• Classifying data
• Configuring access permissions, such as IAM policies
• Selecting or configuring available encryption options, depending on the requirement

• Why: Crisis management relies on established, repeatable procedures for responding to an incident (activation of the crisis team, escalation paths, communications, containment actions). This ensures a coordinated, timely, and auditable response.

• Why not the others:

• A — conformant: Incorrect because one explicit requirement is violated.
• B — consistent: “Consistent” is not sufficient where the implementation contradicts a mandatory specification. The RPC mechanism is covered by the architecture, and the implementation differs from it.
• C — consistent: Incorrect reasoning: the RPC mechanism does have a defined architectural requirement, so conformance must be assessed.
• D — non-conformant: Correct because the implementation fails to follow the specified RPC/threading requirement.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• Automation handles repetitive tasks, and orchestration coordinates responses across tools (SIEM, SOAR, EDR, etc.).
• This allows the security team to process more events with the same number of people, improving throughput and response times.
• Analysts can focus on more complex tasks like investigation and threat hunting instead of manual triage.

• It increases complexity: automation can reduce complexity when well-implemented; complexity is not the main intended benefit.
• It removes technical debt: automation/OR focuses on current incident response efficiency, not primarily on architectural debt.
• It adds additional guard rails: governance is important but not the core value of automation/orchestration within a SIEM.

• The AWS Support Concierge is a specialized team within Enterprise Support whose primary role is handling billing and account questions and helping with account setup and getting started.
• They are not the source for architecture guidance or development assistance; those services are provided by Technical Account Managers (TAMs) or Solutions Architects as part of Enterprise Support.
• For technical support cases, customers typically interact with AWS Support engineers or the TAMs, not the Concierge. The Concierge may route or coordinate related requests, but they don’t provide the technical resolution.

• What Concierge does: billing and account inquiries, onboarding help, coordination with AWS support.
• What Concierge does not do: provide architecture/design guidance or in-depth technical support case resolutions.

• Goal: Guests should not use cameras, but company users can.
• Correct configuration: Guest access settings in the Org-wide settings.

• External access: Controls external-domain communication, not guest capabilities inside Teams.
• Teams settings in Org-wide settings: Too generic; doesn’t specifically target guest capabilities.
• Audio & Video in the default Meeting Policy: Would affect everyone assigned to that policy. To meet the requirement without impacting internal users, you’d need separate policies or guest-specific settings; the exam focuses on the guest-access policy.

• Active vs passive: Active assessment involves actively scanning targets by sending probes/packets to identify hosts, services, and vulnerabilities. Passive assessment observes traffic without probing.
• External vs internal: External assessment is about testing from outside the network perimeter; the scenario doesn’t specify external vantage, only that tools are identifying hosts/services across the enterprise network.

• The Well-Architected Framework has five pillars: Operational Excellence, Security, Reliability, Performance Efficiency, and Cost Optimization.
• Operational Excellence: how you run and improve your systems—monitoring, incident response, and evolving processes.
• Reliability: the ability of a workload to recover from failures, maintain uptime, and scale as demand changes.

• Availability (A) is not a pillar name; it’s an outcome that relates to Reliability.
• Scalability (C) isn’t a pillar name; scalability touches on Performance Efficiency.
• Responsive design (D) is not a pillar in the Well-Architected Framework.

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

• Side loading means installing software from sources outside official or trusted repositories.
• This process can bring in malicious payloads because the installed software hasn’t been vetted. A rootkit is a type of malware that hides its presence and maintains privileged access, making it a prime risk when using untrusted sources.
• Why not the other options:

• Only install apps from trusted sources; verify signatures.
• Use application whitelisting and security controls to block sideloading.
• Keep systems updated and use anti-malware tools capable of detecting rootkits.

• Enable the owner dimension
• Allocate a standard costing inventory model

• Owner dimension (B): This dimension Lets you track who owns the stock. By enabling the owner dimension, items can be configured as either company owned or consignment (vendor-owned) when you create or edit items. Without enabling this dimension, you can’t designate ownership per item.
• Standard costing inventory model (D): Selecting a costing model determines how item costs are calculated and posted. Standard costing provides a fixed cost per unit, which is commonly used for agreed pricing scenarios like consignment arrangements for easier accounting and valuation. It helps ensure consistent cost treatment across transactions for items that can be owned by the company or on consignment.

• Batch dimension (A): Batch tracking is unrelated to ownership and isn’t required to support company-owned vs. consignment configurations.
• Moving average costing (C): This is an alternative costing method. It’s not required to enable ownership config, and the exam’s expected choice focuses on standard costing for this scenario.

• B — Increase provisioned concurrency for Lambda

• D — Refactor the Lambda functions

• E — Use Amazon RDS Proxy

• Windows 10 VMs
• Windows Server 2012 or later VMs
• Running VMs—they do not need to be shut down
• Debian 8.2+ VMs, assuming the specific version is supported
• Stopped or deallocated VMs

• Correct answer: A: The ITIL service value system (SVS).

• The SVS explains how all components (governance, the service value chain, practices, guiding principles, information and technology, partners and resources, and continual improvement) work together to enable value creation from demand to outcomes.

• B: The ITIL guiding principles describe aspirational guidance for decision-making, not how all components/activities interact.
• C: The four dimensions of service management explain areas to consider (organizations/people, information/technology, partners/suppliers, value streams/processes) but don’t describe the integrated system itself.
• D: A service relationship defines the relationship between provider and consumer, not the overall system of components and activities creating value.

• A: Security groups do not control traffic to an S3 gateway endpoint in this way. Gateway endpoints are configured through route tables.
• B: An S3 bucket policy may be needed for authorization, but the error specifically indicates a connectivity or endpoint-routing problem.
• C: Glue connection settings do not require a fully qualified domain name to resolve this endpoint issue.

• What it’s asking: In an ARM template, for an Availability Set, what value should you set for the property platformFaultDomainCount to maximize availability during fabric failures or maintenance?

• Key concept: Fault domains are groups of hardware that can fail independently. By spreading VMs across more fault domains, you reduce the risk that a single hardware fault takes out many VMs.

• Important detail: For managed Availability Sets, the number of fault domains you can use varies by region — typically 2 or 3.

• What to choose: Set platformFaultDomainCount to the maximum supported in your region. In most regions this is 3, which gives you the best resilience. If your region only supports 2, you’d use 2.

• Answer: 3 (Max Value). In ARM template syntax, this would appear as "platformFaultDomainCount": 3 (within the Availability Set resource).

• Disabling GPS: Affects location services, not email connectivity.
• Configuring 4G usage only: Does not enable international data access and could prevent connectivity if 4G is unavailable.
• Connecting using a hotspot: Could provide data, but it is not the most direct solution and depends on another network or device.

• Two VMs
• Distributed across two separate availability zones

• The correct option is B: AWS Storage Gateway.

• Why: The scenario requires backing up on-prem data to AWS without changing existing backup workflows. AWS Storage Gateway provides a hybrid storage solution; specifically, the Tape Gateway emulates a physical tape library, allowing your existing backup software to write to virtual tapes that are stored in AWS (in S3 or S3 Glacier). This lets you back up 10 TB to the cloud while preserving current backup workflows and on-prem infrastructure.

• How it would work: Deploy a gateway appliance or VM on-site, connect your tape-based backup software to the virtual tape library, and start writing to virtual tapes. The data is then archived in AWS, freeing up local storage.

• Why the others aren’t suitable:

• Quick tip: If you weren’t using tape, File Gateway could be another option for file-based backups; Tape Gateway is the right pick for tape-based workflows.

• Problème: le système d’alertes signale des fluctuations tout en manquant les activités qui restent anormalement constantes sur une période longue. Il faut donc un scénario qui capte les anomalies qui se maintiennent dans le temps plutôt que les pics ponctuels.
• Peer: permet de comparer un client à ses pairs; utile pour repérer des écarts relatifs, mais ne cible pas nécessairement les motifs d’anomalie persistante sur plusieurs périodes.
• Revenus mapping: relie les transactions à des sources ou flux de revenus; utile pour l’analyse des fonds, mais pas directement pour détecter une anomalie longue durée.
• Below-the-line: conçu pour détecter des activités qui passent en dessous des seuils habituels ou qui demeurent anormales sur une longue période, comblant ainsi la faiblesse des alertes à long terme.

• Residual neural network (ResNet): Primarily used for computer vision tasks such as image classification.
• Support vector machine (SVM): Commonly used for classification and regression, not natural-language query generation.
• WaveNet: Designed mainly for generating or modeling audio and speech.

• User1 can sign in because the account is cloud-only. It does not depend on the on-premises domain.
• User3 can sign in because the account uses Password Hash Synchronization (PHS). Azure AD has a synchronized password hash and can validate the sign-in even when connectivity to on-premises Active Directory is unavailable.
• User2 cannot sign in because the account relies on Pass-through Authentication (PTA). PTA sends the authentication request to an on-premises PTA agent, which must contact a domain controller. With the internet connection from on-premises lost, that validation cannot occur.

• The Accrue liability on product receipt flag controls whether a liability is accrued and posted at the time of receiving the item.
• If this checkbox is unchecked, receipts won’t create postings to the Product receipt journal. Enabling it ensures the system posts inventory value and the vendor liability when the item is received.

• Go to the Item model group setup form.
• Enable (check) Accrue liability on product receipt.
• Save.

• The other option, Include physical value, affects how physical value is handled but is not the direct cause of postings to the product receipt journal. If issues persist after enabling accrual, you may need to verify related posting definitions or journal setup.

• Key concept: ALE = SLE × ARO

• SLE = $15,000
• Occurrences: 2 in 3 years ? ARO = 2/3 per year ˜ 0.6667

• ALE = $15,000 × 0.6667 ˜ $10,000 per year

• ALE is the expected annual loss, so it averages the losses over each year.
• This helps prioritize risk treatments by comparing ALE to the cost of controls.

• Why this is correct: In Azure Virtual Desktop, user access to a host pool is controlled through App Groups. The default app group for a host pool publishes the full desktop, so adding members to that app group grants them sign-in and access to the desktop (and any RemoteApps in that group). This is the standard way to give users access to AVD resources.

• Why the other options are not correct:

• Practical steps (high level):

• A) You can only apply a single template BOM to a service object.

• C) You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.

• B) You can apply many template BOMs to a service object — false; typically only one template per service object.
• D) You can modify/delete lines only if not associated — false; you can modify templates even after association (per C).

• Hardware and infrastructure
• System software
• Networks and communications
• Technology platforms and services

• Business Architecture: Defines business strategy, organization, functions, and processes.
• Data Architecture: Defines the structure and management of enterprise data.
• Application Architecture: Describes application systems and how they interact to support business and data processing.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Program and project management
• Risk management
• Cloud financial management
• Data governance
• Portfolio management

• Sustainability
• Performance efficiency
• Reliability

• Context: You’ve enabled auditing in Dataverse and need to trim audit data to free storage. The question asks which deletion options you can use.

• What the options typically mean:

• About the provided answer (A, C, D): The list includes “by column,” which isn’t a typical or supported way to purge audit data. The more plausible trio is A (by record), B (date range), and C (by table older than date). If the exam expects A, C, D, that seems incorrect or mis-stated in the source.

• Practical takeaway: To reduce audit storage, use per-record deletions, per-table purge by date, and/or date-range deletions as supported by the environment’s audit management UI or admin docs.

• The Balanced Scorecard translates an organization’s vision and strategy into a set of concrete objectives and metrics across four perspectives (financial, customer, internal processes, learning & growth). This framework explicitly links IT goals to business goals and provides a way to measure and monitor alignment over time.

• Enterprise architecture (EA): Great for governance, standards, and roadmaps to ensure IT assets support business needs, but it’s more about structure and alignment at design time rather than directly measuring ongoing alignment of goals.
• KPIs: Useful metrics, but they don’t by themselves provide a full framework to ensure IT goals are aligned with organizational strategy.
• Enterprise dashboard: A visualization tool for metrics; it helps report status but doesn’t inherently establish or assess alignment.

• An IDS monitors network traffic for signs of attacks and raises alerts. It can be deployed out-of-band (via a SPAN/mirror port or a tap) so it analyzes traffic without being inline, meaning it doesn’t measurably affect latency.
• An IPS (intrusion prevention system) is inline and can block threats, but that processing can introduce some latency and potential throughput impact.
• A firewall also inspects traffic and can add latency, though usually modest with proper hardware, but its primary purpose isn’t continuous passive analysis.
• A load balancer distributes traffic and isn’t used for intrusion analysis.

• Answer: C — Spot Instances

• Why: The workload is a test environment that can be interrupted and does not need to run continuously. Spot Instances let you bid on unused EC2 capacity at a deep discount, making them the most cost-effective option for interruptible workloads.

• Why not the others:

• Quick tips:

• Correct answer: Day 3 (Option B)

• Why: In Engagement Studio, when the program is paused, the prospects’ wait times are also paused and do not count down. They resume from the same point when the program restarts. Here, the prospect was at day 3 of a 5-day wait when paused, so they resume on day 3 after the 1-day pause.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• B: Intégrez des résultats de due diligence tels que les évaluations de risque client.

• C: Utilisez des correspondants en aval pour enquêter et signaler les activités suspectes.

• The answer: Question 51: C — Request trigger.

• To invoke a Logic App from an external service (here, the Azure Application Insights availability test) you need a trigger that starts on an incoming HTTP request. In Logic Apps, this is the trigger that exposes an HTTP endpoint — typically shown as "When a HTTP request is received" and referred to as the Request trigger.
• The other options aren’t appropriate:

• Create a Logic App with the Request trigger to generate a URL.
• Configure Application Insights to post the degraded-availability payload to that URL.
• Add actions (e.g., send email, follow-up) in the Logic App to notify the customer services team.

• Mapping:

• Why:

• Quick note: If you were to host a website on a VM, it would be IaaS; if you used a platform service instead of a VM, it would be PaaS. CaaS (containers) isn’t shown here.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Topic: Conditional Access (CA) policy and MFA for Azure management.
• Policy name: Policy1, created with the template “Require multifactor authentication for Azure management.”
• What the template does: It enforces MFA when signing in to manage Azure resources (Azure management) for the users included in the policy.
• Who is included: The question lists Admin1, Admin2, Admin3, and Admin4 as the admins in the tenant. The template’s default scope for this scenario is to apply to those admin accounts (i.e., all four admins unless you explicitly limit the scope).

• CA policy for “Azure management” targets admin sign-ins.
• If the policy includes Admin1–Admin4, all of them must use MFA on their next sign-in (choice D).

• Voice devices ? VLAN 10
• Data devices ? VLAN 20
• SVI for VLAN 10 ? 192.168.10.1
• SVI for VLAN 20 ? 192.168.20.1

• A: Describes a physical trunk interface, not an SVI.
• B: An SVI can provide management access, but that is not its primary definition here.
• D: SVI does not compensate for insufficient physical ports; it is a logical interface.

• Dynamics 365 Remote Assist — used for remote collaboration and mixed-reality scenarios.
• Dynamics 365 Finance — supports financial and operational management.
• Dynamics 365 Business Central — designed primarily for small and medium-sized businesses’ finance and operations.
• Dynamics 365 for Phones — provides mobile access to Dynamics 365 apps, including Sales, through the mobile Unified Interface.