Test Prep CFA-Level-I Exam Prep
CFA® Level I Chartered Financial Analyst (Page 280 )

• Which batches and markets are affected
• Whether the deficiency affects product quality, efficacy, or patient safety
• Whether the issue is an ongoing manufacturing problem
• Whether immediate containment or distribution suspension is needed

• A — Withdraw the product: may be necessary, but is premature before assessing the risk.
• B — “Dear Dr.” letter: may be appropriate later, depending on the risk.
• C — Notify global authorities: may become mandatory, but the scope and urgency depend on the assessment.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• S3 Glacier Deep Archive is designed for long-term archival data with very infrequent access and has a lower storage cost than S3 One Zone-IA.
• The documents are copies stored elsewhere, so reduced availability and delayed retrieval are acceptable.
• An S3 interface VPC endpoint allows private access from the VPC without exposing the bucket through the public internet.
• A bucket policy can restrict access to requests coming through that endpoint.

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

• The Azure DevOps (Boards only) connector is designed specifically for Azure DevOps Analytics views.
• It authenticates directly to Azure DevOps and lets you select an existing Analytics view.
• Filters defined in the Analytics view are applied by Azure DevOps before Power BI retrieves the data, reducing the amount of data transferred.

• Azure DevOps Server (Boards only) is for on-premises Azure DevOps Server.
• OData Feed can consume OData endpoints, but it is not the dedicated Azure DevOps Analytics-view connector.
• OData queries are not the intended dedicated connector for this requirement.

1. The original app version exists.
2. You create and publish a new version, so there are now two versions.
3. When you restore the previous version, Power Apps does not delete or overwrite the newer version. Instead, it creates another version based on the restored one.

• Original version
• Newly created and published version
• New version created by the restore operation

• Existing Eventhouse data: remains available only in the KQL database.
• Data ingested after enabling the feature: is copied to OneLake and can be accessed through OneLake file explorer.
• New databases: are irrelevant; the setting applies to the selected KQL database.

• Red team: Offensive security; attempts exploitation and simulates attackers.
• Blue team: Defensive security; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team activities to improve defenses, but is not the best direct answer here.
• White team: Usually oversees or coordinates an exercise, including rules of engagement and scope.

• Process Builder: Automates actions based on record changes; it does not create interactive user forms.
• Approval Process: Routes records for approval and captures approval decisions.
• Outbound Message: Sends information to an external system; it does not provide a user interface.

• A: Knowledge of IT platforms, networks, and methodologies — Useful technical knowledge, but the CISO does not need to be the deepest technical expert.
• C: Regulatory and project management knowledge — Important, but compliance and projects must still support the organization’s broader needs.
• D: Managing people and resources — Essential for execution, but effective management of the wrong security priorities will not produce good results.

• Technical platform interfaces: Important for integration and interoperability, but they should support—not drive—the architecture.
• Scalability of the network: Valuable as the organization grows, but a scalable solution is ineffective if it does not meet business or security needs.
• Development methodologies: Relevant to implementation, but they do not define the organization’s fundamental security requirements.

• An active relationship is used automatically when filters are evaluated. An inactive relationship does not propagate filters unless explicitly activated in DAX, so it would not reliably enforce the required security behavior.
• Apply security filter in both directions allows RLS filters to propagate across the relationship in both directions. This ensures that bidirectional filtering respects the RLS rules applied to both tables.
• Assume referential integrity is unrelated to RLS. It is mainly a DirectQuery optimization that allows Power BI to use an inner join when matching keys are guaranteed to exist.
• The relationship must therefore be active, with security filtering enabled in both directions.

• SAS (Serial Attached SCSI):

• SSD (solid-state drive):

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• Unfamiliar locations or IP addresses
• Anonymous or malicious IP addresses
• Leaked credentials
• Unusual sign-in behavior

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• Orders contains order-level information, such as the order date.
• Order Line Items contains the products, quantities, and line amounts associated with each order.
• Merging them on the order key, such as OrderID, places the order date alongside each line item. This allows you to calculate total order value and analyze it over time.
• Product attributes can remain in the Products table and be related to the resulting line-item table through ProductID.

• Merging line items with products addresses product attributes but does not first provide the order-level date and value needed for time analysis.
• DAX calculated columns or lists add unnecessary model complexity.
• Calculating order counts is not the first requirement and does not combine the required order and line-item data.

• 255.255.255.128 = /25: 128 total, 126 usable
• 255.255.255.192 = /26: 64 total, 62 usable
• 255.255.255.224 = /27: 32 total, 30 usable
• 255.255.255.240 = /28: 16 total, 14 usable

• One for the network address
• One for the broadcast address

• 8 total addresses
• 6 usable addresses
• Mask: 255.255.255.248

• Architects design overall Splunk infrastructure and data strategy.
• Administrators manage configuration, access, and system operations.
• Knowledge Managers create and maintain knowledge objects such as data models, field extractions, and event types. They may support pivots, but they are not the primary users of them.

• Data source: Folder
• Transformation: Remove the Content column (or keep only the file-metadata columns)

Why

• File name
• Extension
• Date modified
• Folder path
• Content — the binary contents of the file

1. insert con; ? 1
2. Database.setSavepoint(); ? 2
3. update con; ? 3
4. Database.rollback(sp_admin); ? 4

• The vulnerability scan identifies a vulnerability.
• The administrator verifies that the vulnerability is not present.
• Therefore, the scan produced a false positive.

• True positive: A vulnerability is reported and genuinely exists.
• False negative: A vulnerability exists, but the scan fails to detect it.
• True negative: No vulnerability exists, and the scan correctly reports no issue.

• File is shared externally ? Access level

• File is labeled “Internal only” ? Sensitivity label

• Virus signatures: Primarily associated with antivirus or antimalware tools.
• Security agent deployment: Usually handled by endpoint-management or endpoint-security platforms.
• Vulnerability scanning: Performed by vulnerability-assessment tools, although a SIEM may ingest their results.

• The ERSPAN source is the device or interface whose traffic is being copied.
• The ERSPAN destination is the device receiving the encapsulated copy and forwarding it to the traffic analyzer.
• The local monitor session number is locally significant. Therefore, the source and destination do not need matching session IDs such as 47 or 48.
• The erspan-id identifies the ERSPAN stream and must correspond between the source and destination configuration.

• Self-signed certificate — Causes a certificate trust warning, not incorrect name resolution.
• Nameserver record — A DNS record problem would usually affect multiple users, unless only this computer uses a different DNS server.
• IP helper — Relays certain network services, commonly DHCP, between subnets; it does not normally determine website name resolution.

• Due diligence: Investigating and evaluating a third party before entering into or continuing a business relationship.
• Attestation: An independent party provides assurance about an organization’s claims or controls. A SOC 2 examination is an example of an attestation engagement, but the analyst requesting and reviewing the report is performing due diligence.
• Internal audit: Reviews the organization’s own internal controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• Maximum response and resolution times
• Expected uptime or availability
• Performance requirements
• Escalation procedures
• Consequences for failing to meet requirements

• SOW: Defines a project’s scope, tasks, deliverables, and schedule.
• MOA: Documents specific responsibilities agreed upon by two parties.
• MOU: Records a general understanding or intent to cooperate.

• Document feeder: A scratch, dirt, or debris on the feeder glass or rollers can create a line on every scanned image.
• Pickup rollers: Move paper through the printer; they would not normally create a scanner-only line.
• Corona wire: Affects toner charging and would cause defects on printed output.
• Drum assembly: Also affects printed pages, so faxes and computer print jobs would show the line too.

• # Development
• # Testing
• # Production

• Separate endpoints: relate to compute or connectivity, not dashboard labels.
• Separate queries: retrieve or transform data but do not designate visual sections.
• Direct text written into the dashboard in editing mode: dashboards use text boxes, typically with Markdown formatting, rather than arbitrary text placed directly on the canvas.

• Custom domains: Supported by Basic and higher tiers.
• Dedicated compute: Basic and Standard use dedicated virtual machine instances; Free and Shared use shared infrastructure.
• Load balancing between instances: Standard provides scaling across multiple instances with load balancing.
• Storage: Standard provides more storage than Basic.
• Cost: Standard is the least expensive option that satisfies all the stated requirements.

• Free/Shared: Use shared compute and have limited features; they don’t meet the dedicated-compute requirement.
• Basic: Provides dedicated compute and custom domains, but does not provide the required Standard-level multi-instance capabilities in the exam’s feature comparison.

• Espionage: Stealing confidential information, often for a competitor or foreign entity.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A cyberattack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or services used outside IT oversight.

• When the MVP will be defined — the MVP should already be understood sufficiently when assessing the business case.
• What the MVP is — useful information, but not the key requirement tested here.
• That the MVP is the same as project viability — incorrect. The MVP helps test viability; it is not identical to viability itself.

• The users currently have Office 365 Enterprise E3 licenses assigned directly.
• Assigning Microsoft 365 Enterprise E5 through a group does not automatically remove their directly assigned E3 licenses.
• From the Licenses blade, you can select the E3 product and remove it from all assigned users in one operation. This requires less effort than editing 2,500 users individually.

• Identity Governance manages access reviews, entitlement management, and related governance—not bulk license removal.
• Set-AzureAdUser does not remove product licenses.
• Set-WindowsProductKey applies Windows product keys and is unrelated to Microsoft 365 licensing.

• B: Extending credit to customers increases receivables, so more cash is tied up in working capital.
• C: Replacing obsolete inventory does not reduce the overall inventory investment; it simply changes its composition.
• D: Paying suppliers earlier reduces payables. This uses cash and therefore increases the funds tied up in working capital.

• Suporta domínios personalizados.
• Oferece 50 GB de armazenamento — suficiente para os 10 GB de cada aplicação.
• Usa instâncias de computação dedicadas.
• Inclui balanceamento de carga entre instâncias.
• É o plano mais econômico entre as opções que atendem a todos esses requisitos.

• Active remediation actions role in Microsoft Defender for Endpoint

• Security Reader role in Azure AD/Entra ID

• Security Administrator is broader than necessary because it grants extensive security-management permissions, violating least privilege.
• Compliance Data Administrator is intended for compliance data management, not Defender for Endpoint remediation approvals.

• MTTC: Time required to contain or limit the incident’s impact — best match.
• MTTR: Time required to remediate or recover from the incident; this may include eradication, restoration, and cleanup, which goes beyond merely stopping spread.
• MTTD: How long it takes to discover the incident.
• MTBF: Average time between failures, generally a reliability metric.

• Warehouse size: Larger warehouses use more credits per unit of time than smaller ones.
• Number of clusters: A multi-cluster warehouse can run multiple clusters, and each active cluster consumes credits. Therefore, increasing the maximum or active cluster count can increase consumption.

• Number of users: More users may cause more workload, but users themselves do not consume credits.
• Amount of data processed: Snowflake warehouses are not charged directly by the amount of data scanned. However, processing more data may cause the warehouse to run longer, indirectly increasing credits.

• Custom domains are supported.
• It provides dedicated compute instances.
• It offers enough storage for the applications.
• It supports multiple instances with load balancing between them.
• It is less expensive than higher tiers such as Premium.

• Free and Shared use shared compute and have limited storage, so they cannot meet the dedicated-instance requirement.
• Basic provides dedicated compute and custom domains, but the question’s requirement for the broader multi-instance/load-balancing capability is intended to point to Standard.

• A password cracker would normally be identified by behavior such as loading password hashes or attempting dictionary/brute-force attacks.
• The question describes a routine audit, not password recovery.
• Simply encountering a protected file during an audit is characteristic of a misconfigured or insufficiently privileged FIM.

• B — The glass core component is encased in a cladding.

• D — Light is transmitted through the core of the fiber.

• BNC connectors are associated mainly with coaxial copper cabling, not standard fiber connections.
• Data does not pass through the cladding; the cladding helps reflect and contain the light.
• RJ-45 connectors are used with copper Ethernet cabling, not fiber-optic interfaces.

• Reporting relationships
• Organizational structures
• Leadership styles
• Team maturity
• Individual and group behavior
• Communication and motivation

• Acquire Project Team: Focuses on obtaining the people needed for the project.
• Develop Project Team: Focuses on improving team skills, relationships, and performance.
• Manage Project Team: Focuses on tracking performance, resolving issues, and managing changes within the team.

• Actions that call external APIs
• Subflows
• Connection and credential aliases
• Supporting integration logic

• Action — A reusable operation within a flow, such as “Create a record” or “Send email.”
• Connection — Defines how ServiceNow authenticates and communicates with an external system.
• Integration step — A general flow step, not the name for the packaged integration.

• Access List: controls whether a client is allowed or denied.
• Connect List: controls which wireless networks/APs a station may connect to.

• The job keeps 31 days of regular restore points. A backup from the week of January 1 is older than 31 days by March 20, so it is no longer expected to remain on the performance tier.
• It is also a weekly GFS full backup, retained for 14 weeks. Therefore, it is still protected and has not been deleted.
• In a Scale-out Backup Repository, older backups can be moved from the performance tier to the capacity tier—typically object storage—according to the configured offload policy.
• The archive tier is not selected because the question’s configuration does not indicate that the backup has been archived there.

• Behavioral and anomaly detection
• Threat intelligence integration
• User and entity behavior analytics
• Automated response actions, often through SOAR integration

• Virus signatures: Associated primarily with antivirus or endpoint protection.
• Security agent deployment: Usually an endpoint-management or EDR function.
• Vulnerability scanning: Typically performed by vulnerability-management tools, though a SIEM may integrate their results.

• Marketing users: Dynamic Forms can show all fields.
• Support users: Field visibility rules can display only the Support preference fields on the record page.
• Reporting: Both profiles can still report on all fields because Dynamic Forms controls page visibility, not the underlying field access.

• A — Two record types and page layouts: Page layouts can control field placement and editability, but they are less flexible for conditional field visibility and would not be the best fit here.
• C — Muting permission set: Permission-set muting is used with permission-set groups; it does not conditionally hide fields on a page.
• D — Field-Level Security: FLS would remove field visibility at the security level. If fields are hidden by FLS, users generally cannot report on or access those fields, conflicting with the requirement that both users report on all data.