IIBA CCBA Exam Prep
Certification of Competency in Business Analysis (Page 19 )

• To mitigate resistance, the BA should directly engage the stakeholders who are pushing back (the technical team) to uncover their concerns, constraints, and reasons for resisting the end-of-project handover.
• This enables collaborative problem-solving and may lead to adjustments (e.g., intermediate deliverables, phased rollouts, or alignment of acceptance criteria) that satisfy both business and technical needs.
• Escalating to the sponsor or emailing the business team may not address the root causes of resistance. Reassessing objectives could be useful later, but the immediate best practice is to have a targeted discussion with the technical team to understand and resolve concerns.

• Job shadowing is an elicitation technique that is part of the broader job observation approach. The observer watches workers perform tasks (either passively or actively) to understand the workflow, especially when the worker cannot articulate the process themselves.
• The other options are not elicitation techniques tied to job observation: A) Identifying stakeholders is an initial BA activity; C) Defining and determining business analysis processes is part of planning; D) Planning how requirements will be approached, traced, and prioritized is elicitation planning (a precursor to elicitation), not the observation-based elicitation.

• There are two solutions: A is worth $456,000 to the organization, B is worth $565,000.
• Management chooses A due to lower cost, less risk, and faster completion.
• The opportunity cost is the value of the best alternative that was not chosen. Since B has the higher value ($565,000) and wasn’t chosen, the foregone value is $565,000.
• Note: The \(|565k - 456k| = 109k\) is the difference in value, not the opportunity cost.

• Technical platform interfaces: Important for integration and interoperability, but they should support—not drive—the architecture.
• Scalability of the network: Valuable as the organization grows, but a scalable solution is ineffective if it does not meet business or security needs.
• Development methodologies: Relevant to implementation, but they do not define the organization’s fundamental security requirements.

• Training or coaching
• Mentoring
• Additional support or resources
• Targeted performance improvement plans

• A: Recognition may be appropriate, but awards do not address identified gaps.
• C: Rotating schedules does not necessarily improve the specific competencies that are missing.
• D: Assessment results should be handled sensitively, but keeping them entirely private prevents useful feedback and development discussions.

• Partners first log in to the corporate portal, which uses the shared SAML Identity Provider.
• When they select a Salesforce link, the IdP can send a SAML assertion directly to Salesforce.
• Salesforce validates the assertion and grants access to the Partner Community without requiring another login. This is IdP-initiated SSO because authentication begins outside Salesforce.

• SP-initiated SSO starts when Salesforce sends an authentication request to the IdP. That would be appropriate if users began by visiting Salesforce.
• The Web Server and User Agent OAuth flows are for OAuth authorization, not browser-based SAML federation between an IdP and Salesforce.

• Process Builder: Automates actions based on record changes; it does not create interactive user forms.
• Approval Process: Routes records for approval and captures approval decisions.
• Outbound Message: Sends information to an external system; it does not provide a user interface.

• Matching hashes: The software likely has not changed.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily detect changes.
• Baselines: Define an approved system or configuration state, but they are not the specific integrity mechanism here.
• Tokenization: Replaces sensitive data with substitute values.

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• Base table — the table containing common inherited fields
• Parent table — the table directly extended by the child
• Other tables in the hierarchy

1. Wireless AP

1. Router

1. Firewall

1. Device placement

• Economy: Obtaining inputs at the lowest appropriate cost.
• Efficiency: Making the best use of resources, such as staff, money, and equipment.
• Effectiveness: Achieving the intended objectives or outcomes.

• The listener uses a virtual IP address shared by the availability-group replicas.
• Floating IP, also called Direct Server Return (DSR), allows the SQL Server nodes to respond using the listener’s IP address rather than their individual VM IP addresses.
• This is required for the availability-group listener to function correctly with an Azure internal load balancer.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

• JDBC
• SnowSQL
• Snowflake Web Interface (UI)
• ODBC
• Python connector

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• Input validation: Prevents malicious or malformed input within an application; it does not authenticate a software package.
• Secure cookies: Protect web-session cookies; they do not protect downloadable software.
• Fuzzing: Tests software by supplying unexpected input to find vulnerabilities; it does not verify software integrity.

• Operating profit is affected because transfer price determines internal sales revenue.
• Return on investment (ROI) is affected because ROI depends partly on operating profit.
• Sales revenue is affected because the division records revenue from transferring its output.
• Cost of components purchased is not affected by the transfer price. These are input costs paid to external suppliers and are based on the supplier’s price.

• Training data for potential bias before model training
• Trained models for bias in predictions
• Model features to help explain how they influence predictions

• A: RAG workflows are typically built using services such as Amazon Bedrock, knowledge bases, and data sources.
• B: Monitoring model quality in production is primarily associated with SageMaker Model Monitor.
• C: Documenting model details is handled by capabilities such as SageMaker Model Cards.

• Custom domain: miami.weyland.com requires a paid App Service tier; Free and Shared are unsuitable.
• Two instances: Standard supports scaling to multiple instances.
• SSL: Standard includes SSL support.
• 12 GB storage: Basic provides only about 10 GB, so it does not meet the requirement. Standard provides substantially more storage.
• Cost minimization: Standard is the lowest tier among the choices that satisfies all requirements.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• CSIRT: A Computer Security Incident Response Team that handles and coordinates incident response.
• CVSS: A scoring system used to rate the severity of vulnerabilities.
• SOAR: Security Orchestration, Automation, and Response technology used to automate security workflows.

• Remote and global work: Access is based on the approved device, not a specific office or geographic location.
• Seamless login: Users may not need to repeatedly enter credentials on a recognized device.
• Limited equipment: It uses devices employees already have rather than requiring separate hardware.

• Geotagging: Restricts access based on location and may prevent legitimate remote work.
• Smart cards: Require issuing and managing additional physical equipment.
• Time-based logins: Limit access by time and do not provide a seamless authentication experience.

• Firewall
• Intrusion prevention and detection
• Antivirus or antimalware
• Web and email filtering
• Virtual private networking (VPN)
• Sometimes content filtering and centralized reporting

• A — Use getRecordTypeInfosByDeveloperName()

apex 
  Id rtId = Schema.SObjectType.Account 
      .getRecordTypeInfosByDeveloperName() 
      .get('Business_Account') 
      .getRecordTypeId();

• C — Query the RecordType object

apex 
  RecordType rt = [ 
      SELECT Id 
      FROM RecordType 
      WHERE SObjectType = 'Account' 
      AND Name = 'Business Account' 
      LIMIT 1 
  ];

• B: An outbound SOAP call is unnecessary and inefficient.
• D: Hardcoding an ID is not dynamic, and IDs can differ between orgs.

• NAT traversal: Helps WAN Edge, vSmart, and vManage devices discover how to reach one another through NAT.
• Initial orchestration: Authenticates and introduces devices when they first join the SD-WAN fabric.
• Connection brokering: Provides information that allows devices to form their required control connections, after which the vBond is generally not in the data path.

• WAN Edge: Forwards user traffic and forms secure tunnels.
• vSmart: Controls the overlay control plane and distributes routes and policies.
• vManage: Provides centralized management, configuration, and monitoring.

• Document feeder: A scratch, dirt, or debris on the feeder glass or rollers can create a line on every scanned image.
• Pickup rollers: Move paper through the printer; they would not normally create a scanner-only line.
• Corona wire: Affects toner charging and would cause defects on printed output.
• Drum assembly: Also affects printed pages, so faxes and computer print jobs would show the line too.

• Key-based authentication: Provides an endpoint secured with API keys.
• Real-time REST access: Supports online inference through an HTTP/REST endpoint.
• No VM vCPU quota consumption: Microsoft hosts and manages the underlying infrastructure, so your subscription’s VM quota isn’t used.

• Batch: Intended for asynchronous, large-volume processing rather than real-time requests.
• Self-hosted container: You manage the infrastructure and typically need compute resources and quota.
• Standard: This is not the clearest deployment type for the stated requirements; the specific Foundry option is serverless API.

• Feedback form: Captures opinions, not necessarily actual behavior; users may not respond.
• Questionnaire: Relies on memory and subjective judgments about usefulness.
• Interviews: Can provide valuable qualitative insights, but a sample of users may not represent overall usage accurately.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

• # Development
• # Testing
• # Production

• Separate endpoints: relate to compute or connectivity, not dashboard labels.
• Separate queries: retrieve or transform data but do not designate visual sections.
• Direct text written into the dashboard in editing mode: dashboards use text boxes, typically with Markdown formatting, rather than arbitrary text placed directly on the canvas.

• Disable default accounts: Default or unused accounts may have known usernames or predictable settings, making them targets. They should be disabled, removed, or securely configured.
• Remove unnecessary services: Every running service creates potential vulnerabilities. Removing services the server does not need reduces exploitable entry points.

• Add the server to the asset inventory: Important for asset management, but not a hardening step.
• Document default passwords: Default passwords should be changed or eliminated—not documented for continued use.
• Send server logs to the SIEM: Valuable for monitoring and detection, but generally performed as part of logging/monitoring configuration.
• Join the server to the corporate domain: May be necessary operationally, but does not itself harden the server.

• Due diligence: Investigating and evaluating a third party before entering into or continuing a business relationship.
• Attestation: An independent party provides assurance about an organization’s claims or controls. A SOC 2 examination is an example of an attestation engagement, but the analyst requesting and reviewing the report is performing due diligence.
• Internal audit: Reviews the organization’s own internal controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• Suporta domínios personalizados.
• Oferece 50 GB de armazenamento — suficiente para os 10 GB de cada aplicação.
• Usa instâncias de computação dedicadas.
• Inclui balanceamento de carga entre instâncias.
• É o plano mais econômico entre as opções que atendem a todos esses requisitos.

• GPS coordinates
• Date and time the image was taken
• Camera or device information
• Image dimensions and software used

• Log data: Records generated by systems or applications, not normally embedded in image files.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification, not the specific type of information being extracted.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.

1. Discovery tries the SSH probe first.
2. SSH fails.
3. Discovery tries SNMP, which succeeds.
4. Discovery records SNMP as the preferred service for that IP.
5. Future discoveries try SNMP first.

• Classification identifies the type of device, such as a server, router, or printer.
• Credential affinity remembers which credentials work for a device.
• MID Server affinity associates a device or network with a particular MID Server.
• IP service affinity specifically controls the preferred discovery protocol or service.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• A. Periodically rotate responsibilities: May reduce some risks, but it does not directly detect unauthorized changes.
• B. Review segregation-of-duties conflicts: Identifies incompatible access combinations, not whether a specific data change was unauthorized.
• C. Log changes in an outside application: Logs provide evidence, but someone must review and analyze them. Logging alone does not detect misuse.
• D. Independent review: Directly detects unauthorized changes and reduces the risk that the person making the change can conceal it.

• Streams — track change data for tables or views.
• External tables — reference data stored in an external cloud storage location.

• Role — account-level security object.
• Warehouse — account-level compute resource.
• User — account-level security object.
• Share — account-level object used to share data.

1. Initiate — establish the project, scope, team, and governance.
2. Plan — develop the detailed plan, schedule, resources, and implementation approach.
3. Execute — configure, integrate, migrate, test, and prepare the solution.
4. Deploy — move the solution into production and support go-live.
5. Close — complete handover, confirm outcomes, and formally close the project.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

• New investment: $536,500
• Resulting NPV: $0

• Who owns security risks and decisions
• Who is responsible for implementing controls
• Who reports security performance to management
• How security responsibilities align with business objectives

• B — Compliance with audit requirements: Governance may support compliance, but audit compliance is not its main objective.
• C — Monitoring security incidents: This is an operational security activity, not the central purpose of governance.
• D — Creation of tactical solutions: Governance establishes direction and oversight; tactical solutions belong to management and operational teams.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• Orders contains order-level information, such as the order date.
• Order Line Items contains the products, quantities, and line amounts associated with each order.
• Merging them on the order key, such as OrderID, places the order date alongside each line item. This allows you to calculate total order value and analyze it over time.
• Product attributes can remain in the Products table and be related to the resulting line-item table through ProductID.

• Merging line items with products addresses product attributes but does not first provide the order-level date and value needed for time analysis.
• DAX calculated columns or lists add unnecessary model complexity.
• Calculating order counts is not the first requirement and does not combine the required order and line-item data.

1. The original app version exists.
2. You create and publish a new version, so there are now two versions.
3. When you restore the previous version, Power Apps does not delete or overwrite the newer version. Instead, it creates another version based on the restored one.

• Original version
• Newly created and published version
• New version created by the restore operation