PRINCE2 PRINCE2 Practitioner Exam Prep
PRINCE2 Practitioner (Page 17 )

• One physical NIC is active and carries traffic.
• Another NIC remains on standby.
• If the active uplink fails, traffic switches to the backup uplink.
• This provides redundancy without requiring special switch-side link aggregation configuration.

• Balance-SLB: Distributes traffic based on source load balancing; not the default.
• Balance-TCP: Uses dynamic TCP traffic balancing and generally requires appropriate network-switch configuration.
• No Uplink Bond: Incorrect because vs0 is normally configured with redundant uplinks.

• When the MVP will be defined — the MVP should already be understood sufficiently when assessing the business case.
• What the MVP is — useful information, but not the key requirement tested here.
• That the MVP is the same as project viability — incorrect. The MVP helps test viability; it is not identical to viability itself.

• 24 cores: Available in the Business Critical provisioned-compute configurations.
• Approximately 124 GB memory: Matches the memory capacity of the relevant Business Critical hardware configuration.
• More than 50,000 IOPS: Business Critical uses local SSD storage and provides the high I/O performance required here.
• 500 GB storage: Well within the tier’s supported capacity.

• Premium: The DTU-based Premium tier does not provide the required combination of compute, memory, and I/O characteristics.
• Hyperscale: Hyperscale is primarily intended for very large databases and independent storage scaling. It is not the best match for these specific high-memory and high-IOPS requirements.

• nmap - 10.11.1.130 — a network scanning command; mitigated with controls such as firewalls, monitoring, or access restrictions.
• “Click this link to get your free gift card.” — a phishing or social-engineering message; addressed through user awareness, email filtering, and authentication controls.
• “Your connection is not private.” — indicates a certificate or TLS validation problem; addressed by correcting the certificate or secure-connection configuration.

• Virtual introductions: Team members share their role, experience, location, and working preferences.
• Online icebreakers: Short, informal activities such as “two truths and a lie.”
• Virtual coffee chats: Pair team members for informal, non-project conversations.
• Collaborative problem-solving: The team works together on an online puzzle or scenario.
• Retrospectives: The team discusses what went well, what did not, and how to improve.
• Working-agreement sessions: The team agrees on response times, meeting etiquette, communication channels, and handoffs.
• Recognition sessions: Members acknowledge one another’s contributions.
• Remote workshops: Teams jointly create plans, diagrams, or schedules using collaboration tools.

• Escape to host: A virtualization attack where code escapes a guest VM and accesses the host system. Nothing in the scenario mentions virtualization.
• Browser extension: Can redirect or manipulate web-browser traffic, but not normally database-server traffic.
• Valid accounts: Describes using stolen or compromised credentials, not redirecting network traffic.
• Process injection: Injecting malicious code into a legitimate database or networking process could allow an attacker to alter how that process handles outgoing traffic.

• UPS battery-backed outlets: Connect only essential devices needed during an outage:

• Surge-protector-only outlets: Connect nonessential devices, especially the printer. Printing does not need to continue while you are saving work and shutting down.
• UPS power source: Plug the UPS directly into a wall outlet.
• Surge protector power source: Plug it directly into a wall outlet as well. Do not normally plug a surge protector into the UPS, because that creates a daisy chain and can overload the UPS.

• Low: Applies system, tenant, and user-based suppressions. Activity from locations commonly used by that user is more likely to be suppressed.
• Medium: Applies system and user suppressions.
• High: Applies only system suppressions, so more unusual-location activity generates alerts.

• Penetration test: Tests for exploitable vulnerabilities; it does not provide a broad opinion on whether security controls operate effectively.
• Annual self-assessment: Not independent, so it provides less assurance.
• Allow each client the right to audit: Inefficient because every customer may conduct a separate audit, creating duplicated effort and disruption.

1. x = -100
2. -100 < x < 100
3. 100 = x < 1000
4. x = 1000

• -500 ? class 1
• 0 ? class 2
• 100 ? class 3
• 1000 ? class 4

• Virus signatures: Primarily associated with antivirus or antimalware tools.
• Security agent deployment: Usually handled by endpoint-management or endpoint-security platforms.
• Vulnerability scanning: Performed by vulnerability-assessment tools, although a SIEM may ingest their results.

• MFA: Protects sign-in and authentication.
• Azure Key Vault: Protects deployment secrets and credentials.
• Answer: No (B).

• Firewall
• Intrusion prevention and detection
• Antivirus or antimalware
• Web and email filtering
• Virtual private networking (VPN)
• Sometimes content filtering and centralized reporting

• Feedback form: Captures opinions, not necessarily actual behavior; users may not respond.
• Questionnaire: Relies on memory and subjective judgments about usefulness.
• Interviews: Can provide valuable qualitative insights, but a sample of users may not represent overall usage accurately.

• Injection
• Broken access control
• Authentication failures
• Security misconfiguration
• Cross-site scripting

• STIX: A standardized language and format for exchanging threat intelligence.
• OVAL: Used to describe and assess system vulnerabilities and configuration issues.
• Threat intelligence feed: Provides current indicators and intelligence about threats, but not necessarily a structured overview of common application exploitation methods.
• CVE: A catalog of individually identified, publicly disclosed vulnerabilities.

sql 
ALTER TABLE dbo.DimCustomer 
ADD CONSTRAINT PK_DimCustomer 
PRIMARY KEY NONCLUSTERED (CustomerKey) 
NOT ENFORCED;

1. ALTER TABLE dbo.DimCustomer
2. ADD CONSTRAINT PK_DimCustomer PRIMARY KEY NONCLUSTERED (CustomerKey)
3. NOT ENFORCED

• Data only needs to be current at 7 AM each day, so scheduled refresh is sufficient.
• Import mode provides the fastest report interaction because data is stored in Power BI’s in-memory engine.
• It supports row-level security (RLS), including the USERNAME() filter.
• You can limit the imported data to the current year and previous three years to reduce model size.
• DirectQuery would generally provide slower visual response times and is unnecessary here.
• Dual is mainly useful in composite models where some tables use DirectQuery and others use Import. That is not required by this scenario.
• Live connection is not appropriate because you are creating the semantic model.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• ?? ?? ?? ??
• ?? NFS ?? SMB ?? ??
• ?? ???? ???
• ?? IP ??? ???? ?? ???
• ??? ?? ???? ?????

• B: ????? NFS ? Snowball Edge? ?? ?? ? AWS? ?? ? S3
• D: ????? NFS ? ????/Direct Connect ? File Gateway ? S3

• B: Extending credit to customers increases receivables, so more cash is tied up in working capital.
• C: Replacing obsolete inventory does not reduce the overall inventory investment; it simply changes its composition.
• D: Paying suppliers earlier reduces payables. This uses cash and therefore increases the funds tied up in working capital.

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

1. System prompts can authorize users — No

1. System prompts can reduce TPM consumption — Yes, with qualification

1. System prompts guide generative AI behavior — Yes

DAX 
Previous Year Sales = 
CALCULATE( 
    [Total Sales], 
    PARALLELPERIOD('DATE'[Month], -1, YEAR) 
)

• CALCULATE evaluates [Total Sales] after modifying the filter context.
• PARALLELPERIOD shifts the current date period. -1 moves it backward, and YEAR specifies a one-year shift.
• 'DATE'[Month] is the date column used for the time calculation. In a proper date table, this should be a real date column or an appropriate calendar column—not merely text such as "January".

• Annual interest payments net of tax relief (A): future cash outflows for the issuer.
• Redemption value (B): the final cash outflow when the bond is redeemed.
• Market value now (C): the cash proceeds received now, acting as the initial cash flow in the IRR calculation.

• Firewalls and routers
• Servers and applications
• Endpoint devices
• Authentication systems
• Cloud services

• Centralized log collection
• Event correlation
• Dashboards and reporting
• Alerting
• Compliance support

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• A — Consumption-based pricing: AWS generally uses a pay-as-you-go model. You pay for the resources you consume rather than purchasing hardware upfront or paying for unused capacity.
• C — Economies of scale: AWS purchases and operates infrastructure at a very large scale, allowing it to reduce costs and pass some savings to customers through lower service prices.

• Perpetual licenses: These involve paying once for permanent software ownership and are not a primary AWS Cloud economic benefit.
• AWS Enterprise Support at no additional cost: Enterprise Support has an additional charge.
• Bring-your-own-hardware model: AWS provides and manages the underlying cloud infrastructure; customers do not normally bring their own physical servers.

DAX 
Blue Sales = 
CALCULATE( 
    [Total Sales], 
    KEEPFILTERS('Product'[Color] = "Blue") 
)

• CALCULATE evaluates [Total Sales] after applying an additional filter.
• 'Product'[Color] = "Blue" restricts the calculation to blue products.
• KEEPFILTERS ensures the existing filter context is preserved. For example, filters for year, region, or customer remain active. If Color is already filtered, the blue condition is applied as an intersection rather than replacing the existing filter.
• Avoid ALL, because it removes filters and would not maintain the existing context.

• GPS coordinates
• Date and time the image was taken
• Camera or device model
• Exposure settings

• Log data: Records events or activities, such as system or application activity.
• Encrypted data: Information intentionally encoded to prevent unauthorized access.
• Sensitive data: A broad classification for information requiring protection; geolocation may be sensitive, but the technical type stored in the image is metadata.

• Required response time
• Resolution time
• Availability or uptime
• Support hours
• Performance targets
• Consequences if targets are missed

• SOW (Statement of Work): Defines the project’s scope, tasks, deliverables, and schedule.
• MOA (Memorandum of Agreement): Describes the responsibilities and commitments between parties.
• MOU (Memorandum of Understanding): Documents a general mutual understanding or intent, often before a formal agreement.

• File hashes
• Strings and metadata
• Binary or code structure
• Known malicious patterns
• Embedded indicators or signatures

• Sandbox: Executes the file in an isolated environment; useful for observing behavior, but usually slower.
• Network traffic analysis: Examines communications generated by a system or application, not the file itself.
• Package monitoring: Tracks software packages or installations and is not the primary method for examining malware signatures.

• CHAP: Uses a challenge-response exchange, so the password is not directly transmitted.
• IPsec: Provides authentication, integrity, and encryption for IP communications.
• EAP: An authentication framework that supports stronger methods, such as certificates or token-based authentication.

Step 1: Calculate the rights issue price

Step 2: Calculate the number of new shares

Step 3: Calculate the value after the issue and project

• Rights issue proceeds: $21.6m
• Project NPV: $5m

Step 4: Calculate the theoretical ex-rights price

• Frequency/likelihood = how often or how likely the risk is to occur.
• Severity/impact = how damaging or costly the consequences would be.

• A minor equipment fault occurring frequently may have high frequency but low severity.
• A major cyberattack occurring rarely may have low frequency but high severity.
• A risk that happens often and causes substantial losses has high frequency and high severity.

1. Open Notepad as Administrator.
2. Open:

1. Remove or correct the line mapping the website to the wrong IP address.
2. Save the file.
3. Optionally run:

cmd 
   ipconfig /flushdns

• Admin access to the deployment pipeline
• Contributor access to the Development and Test workspaces
• Viewer access to the Production workspace

• Regression predicts continuous numeric outcomes, such as house price, temperature, or sales amount.
• Linear regression assumes the target can be estimated from a linear relationship between the input features and the target.
• In Azure Machine Learning, you use a labeled dataset containing:

• Classification predicts a category or class, such as “spam” or “not spam.”
• Clustering groups similar records without a known label; it is an unsupervised learning technique.

• Dark web: A place where leaked credentials may be sold or shared, not usually the original source.
• Threat feeds: Collections of intelligence about threats, not a typical leakage source.
• State actors: A type of attacker, not an accidental corporate disclosure source.
• Vulnerability databases: Track known vulnerabilities, rather than leaked credentials.

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• VPC: A logically isolated virtual network within a cloud provider; it describes network design, not the user-access model.
• NFV: Runs network services as software instead of on dedicated hardware.
• SaaS: Delivers software over the internet. Although the application may be delivered as SaaS, the question emphasizes its availability to multiple user groups, which points to multitenancy.

• Installing software
• Applying configuration changes
• Calling PowerShell scripts
• Running setup or customization commands

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

• GPO logon script: Runs only when a user logs on and depends on domain/GPO processing.
• GPO startup script: Runs during startup, but requires the VM to be domain joined and receives the applicable GPO.
• Place scripts in a VHD: Merely makes the scripts available; it does not automatically execute them.

• A — Use getRecordTypeInfosByDeveloperName()

apex 
  Id rtId = Schema.SObjectType.Account 
      .getRecordTypeInfosByDeveloperName() 
      .get('Business_Account') 
      .getRecordTypeId();

• C — Query the RecordType object

apex 
  RecordType rt = [ 
      SELECT Id 
      FROM RecordType 
      WHERE SObjectType = 'Account' 
      AND Name = 'Business Account' 
      LIMIT 1 
  ];

• B: An outbound SOAP call is unnecessary and inefficient.
• D: Hardcoding an ID is not dynamic, and IDs can differ between orgs.

• Root path cost
• Port priority
• Port ID

text 
interface GigabitEthernet0/1 
 spanning-tree vlan 10 port-priority 64

• Interface number: Helps form the port ID but is not normally configured as the preference value.
• VLAN priority: Not used to select a preferred forwarding interface.
• Hello time: Controls how often BPDUs are sent; it does not select a preferred port.

• MTTC: Time required to contain or limit the incident’s impact — best match.
• MTTR: Time required to remediate or recover from the incident; this may include eradication, restoration, and cleanup, which goes beyond merely stopping spread.
• MTTD: How long it takes to discover the incident.
• MTBF: Average time between failures, generally a reliability metric.

• Complex inputs: Queueable jobs can accept objects such as Map<Id, Project__c> and List<Account> through the class constructor.
• Long-running callouts: Implement Database.AllowsCallouts in the Queueable class.
• Confirmation/status: System.enqueueJob() returns an AsyncApexJob ID, which can be used to query job status and determine whether execution completed successfully.

apex 
public class ProjectQueueable 
    implements Queueable, Database.AllowsCallouts { 


    private Map<Id, Project__c> projects; 
    private List<Account> accounts; 


    public ProjectQueueable( 
        Map<Id, Project__c> projects, 
        List<Account> accounts 
    ) { 
        this.projects = projects; 
        this.accounts = accounts; 
    } 


    public void execute(QueueableContext context) { 
        // Perform the callout 
    } 
}

• @future(callout=true) supports callouts, but future methods accept only primitive values or collections of primitives—not complex sObjects or maps of sObjects.
• Database.AllowsCallouts
 Hyderabad, India