DRAG DROP (Drag and Drop is not supported)An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch.Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.Select and Place:
Answer(s): A
https://www.cisco.com/c/en/us/support/docs/switches/nexus-7000-series-switches/112213-netflow-nexus7000-nsox-configex.html
Which virtual MAC address is the default for HSRP version 2 group 10?
Answer(s): B
In HSRP version 1, group numbers are restricted to the range from 0 to 255. HSRP version 2 expands the group number range from 0 to 4095.HSRP version 2 permits an expanded group number range, 0 to 4095, and consequently uses a new MAC address range 0000.0C9F.F000 to 0000.0C9F.FFFF.The increased group number range does not imply that an interface can, or should, support that many HSRPgroups. The expanded group number range was changed to allow the group number to match the VLAN number on subinterfaces.The last digits of the MAC address is the HSRP group, in hex. 10 in hex is A.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/15-mt/fhp-15-mt-book/fhp-hsrp-v2.pdf
Refer to the exhibit.Which statement about the ERSPAN configuration in this environment is true?
Answer(s): D
The Erspan-id needs to match between the switches. The ג€monitor sessionג€ ID is only locally significant and does not need to match on each device.
https://www.letsconfig.com/how-to-configure-erspan-on-cisco-nexus-switches/
Refer to the exhibit.Which two statements about the routing table of the leaf switch are true? (Choose two.)
Answer(s): A,D
10.20.1.0/24 is a BD in ACI because of the part which says "direct, pervasive".For the other answer choice, we see form the administrative distance and the "internal" naming, we know that this is an external subnet (172.16.100.0/24) and that as all external routes are exchanged withing the fabric through MP-BG. MP-BGP is actually used to populate the leaves in the fabric with routing on how to reach those external routes. In MP-BGP, the spines are only the route reflectors. So from this we know that the next hop of the external subnet will be a VTEP of a leaf.
Which mroute state is created when Bidirectional PIM is deployed at a site?
Bidirectional PIM is a different flavor of multicast than what you are probably used to (sparse, dense and sparse-dense mode). Most multicast networks have a couple of sources and many receivers. Bidirectional PIM has been invented for networks where we have many sources and receivers talking to each other. An example of this is videoconferencing where it's not just 1 source with many listeners but all the participants are communicating with each other.The downside of using PIM sparse mode with many active sources and receivers is that we will see many mroute state entries that can take quite some resources. Using PIM sparse mode the RP builds 2 entries:(*,G)(S,G)When we use PIM bidirectional mode the RP will never build a (S,G) entry and we only allow the (*,G) entry for the shared tree. PIM routers will never build theSPT (Shortest Path Tree) towards the source.
https://networklessons.com/multicast/multicast-bidirectional-pim
Post your Comments and Discuss Cisco 350-601 exam dumps with other Community members:
Steven Commented on August 02, 2025 First time trying out, will update the result Anonymous
wtb Commented on July 13, 2025 these questions are over 2 years old UNITED STATES
Abbas Commented on May 21, 2025 Refer to the exhibit. Which action is taken to ensure that the relay agent forwards the DHCP BOOTREQUEST packet to a DHCP server? question 261, answer is D, ip dhcp relay information option Example: Router(config)# ip dhcp relay information option Enables the system to insert the DHCP relay agent information option (option-82 field) in forwarded BOOTREQUEST messages to a DHCP CANADA
Giovani Commented on May 14, 2025 The question bank for practice in this exam is quite decent. I practiced all of them for about 2 weeks and then went for my test. And got my cert on first try. Thank you for this service. CANADA
Abbas Commented on March 24, 2025 Question 42 answer is verify and commit (A and B) Anonymous
Finn Commented on May 04, 2023 I appreciated the mix of multiple-choice and short answer questions. I passed my exam this morning. IRLAND
Finn Commented on May 04, 2023 i appreciated the mix of multiple-choice and short answer questions. i passed my exam this morning. IRLAND
Jack Commented on June 02, 2020 This crisis [the COVID-19 pandemic] has demonstrated the need to be digital-first, agile and could-prepared. Therefore, I have started to get as many could based certificates as I can. With the help of these brain dumps I think it is possible. UNITED KINGDOM