Cisco 350-601 Exam Actual Questions
Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (Page 25 )

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• Correct answer: All four statements are true (A, B, C, and D). The given key (A,B) is likely incorrect.

• A) Customers can change the size of the Warehouse after creation — Yes. You can resize a virtual warehouse after it’s created using ALTER WAREHOUSE ... SET WAREHOUSE_SIZE.
• B) A Warehouse can be resized while running — Yes. Snowflake supports online resizing; you can change the size without stopping queries.
• C) A Warehouse can be configured to suspend after a period of inactivity — Yes. You can enable auto-suspend with a delay (AUTO_SUSPEND).
• D) A Warehouse can be configured to auto-resume when new queries are submitted — Yes. You can enable auto-resume (AUTO_RESUME) so a suspended warehouse automatically resumes on new queries.

• Example commands:

• Even if a warehouse is resizing or auto-suspending, queries will be queued and then executed once the warehouse has the appropriate capacity.

• A. Flash the BIOS: Not the first move. A BIOS update can be risky when POST is failing. It’s better to first rule out simpler causes (like RAM seating). BIOS flashing is usually done if the CPU isn’t supported by the current BIOS, which you’d check after RAM seating.

• B. Check the CMOS battery: Possible but unlikely the immediate cause. CMOS battery issues would more likely cause BIOS settings to reset or clock problems. RAM seating is a more common, direct fix after a motherboard swap.

• D. Reinstall the old motherboard: Not a troubleshooting step for the new system. The goal is to get the new motherboard to POST, not revert to old hardware.

• C. Reseat the RAM: Correct because memory seating problems are the most common cause of POST failures after a motherboard swap. Re-seating ensures proper contact in the new board’s slots.

• Security Development Operations (SDO): a security-focused take on DevOps, integrating security into the development pipeline.
• Service Data Object (SDO): a data representation used in some middleware or enterprise apps.
• Software-Defined Overlay (SDO): a networking overlay concept.
• Secure Data Object: a generic data-security term.

• runParallel is defined as async, so it returns a Promise.
• To use the result, you attach a then handler (or use await inside another async function).

• A: “Async runParallel() .then(data);” is invalid. “async” is a keyword for function declarations, not something you put in front of a call, and you’d need a function as the then-argument.
• B: “runParallel().done(function(data){return data;});” .done is not standard in native Promises (it exists in some libraries). Without a compatible library, this won’t work.
• C: “runParallel().then(data);” is invalid because then expects a function as its argument; data is not a function.
• D: “runParallel().then(function(data){ return data; });” is valid (or equivalently, runParallel().then(data => data);).

• The robust, standard option is D.
• B could work only with a library that provides .done; otherwise it’s not reliable.

• A limited lifetime
• Permissions defined by an IAM role or policy
• The ability to access AWS APIs without using long-term IAM user credentials

• Amazon API Gateway — Builds and manages APIs; it does not generally issue AWS credentials for applications.
• IAM users — Usually use long-term credentials, which are less suitable for applications.
• IAM instance profiles — Provide temporary role credentials to applications running on EC2 instances, but are specifically tied to EC2. The broader requirement described is best met by AWS STS.

• A. Custom and standard objects have standard fields. True. Both object types include standard fields (for example, CreatedDate, LastModifiedDate, Owner). Custom objects also have the Name field, which is a standard field on all objects.
• B. Standard objects are included with Salesforce. True. Standard objects (like Account, Contact, etc.) come with Salesforce out of the box.
• C. A new standard object can be created. False. You can create custom objects, but you cannot create new standard objects.
• D. Only standard objects support master-detail relationships. False. Master-detail relationships can be used with both standard and custom objects.

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\Configure-VM.ps1

• GPO logon script: Runs only when a user logs on, so configuration may be delayed and is user-dependent.
• GPO startup script: Can work, but requires the VMs to be domain-joined and introduces GPO dependency. It is not specifically tied to Windows deployment.
• Place scripts in a VHD: Merely makes the files available; it does not execute them.

• This is a lookup relationship. Salesforce does not cascade access from a child (Opportunity) to its parent (Account) via implicit sharing.
• To view the Account, the user must have explicit access to the Account (via its OWD/sharing, or object permissions).

• The user has Read/View (or higher) on Account via profile/permission set.
• Manual sharing or a sharing rule grants that Account to the user.
• The Account is exposed by a broader permission like View All/Modify All on Account.
• Role hierarchy with Grant Access Using Hierarchies could grant access to Accounts owned by others, if applicable.

• ?????? CPU
• ?????????????????
• ??????????????????????????
• ???????????? throughput
• ??????????????????????????????

• A ??????? system software ????????????????????????????????? ??????????????????????????????????
• B ?????????????????????????? ????????????????????????? ?????????????????????????????
• D ????????????????????????? ?????????????? ?????????????????????????????????????????

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

• The mapping and resolution of endpoint identities (EIDs) to their location (RLOCs) in an SD-Access fabric is handled by the control plane using the LISP protocol.
• Why not the others:

• Why: Table.Profile returns a per-column profile that includes statistics such as count, null count, distinct count, and standard deviation. It also provides min/max and average where applicable, which matches the requested metrics (Count, Average, Null count, Distinct count, Standard deviation).
• Syntax: Table.Profile(table as table, optional additionalAggregates as nullable list) as table
• How it helps: After running Table.Profile on your table, you can extract the per-column stats you need and display them in your semantic model or report.

• Phishing can map to two MITRE ATT&CK tactics depending on the attacker’s objective.

• Therefore, phishing isn’t confined to a single tactic; it can serve both Reconnaissance and Initial Access, which is why option D (Reconnaissance, Initial Access) is correct.

• Server — provides services or resources
• Endpoint — a user device connected to the network
• Ethernet — a networking technology, not a filtering device
• Firewall — filters and controls traffic

• Answer: D) Out-of-band management

• Why this is correct:

• Why the other options aren’t suitable here:

• Sales Processes define the set of Opportunity stages for a given workflow.
• Record Types let you have different data models (different fields and picklist values) on the same object.
• Page Layouts control which fields are shown/required for each record type.

• Create three Sales Processes so each team can use its own stages.
• Create three Record Types so each team has its own fields and picklist values.
• Create three Page Layouts so each record type shows the appropriate fields.

• Context: You’re configuring a Windows Autopilot deployment profile (Profile1) for Windows 11 devices. The hotspot asks you to pick the correct behavior for two statements based on the profile’s settings.

• Box 1: “can modify the desktop settings only for themselves”

• Box 2: “Cortana settings” with options like computer name, keyboard layout, etc.

• Correct answer: A — a clear business case has been established.

• The audit focus for IT procurement is ensuring there is a solid economic justification for the investment. A clear business case documents the expected benefits, costs, risks, and alignment with strategic objectives, which governs whether the investment is worth pursuing.
• The other options are important controls or project aspects, but they are secondary to ensuring the investment is justified financially and strategically:

• A) configure matching hold and delay timers

• B) configure matching key-strings

• C) configure matching priority values

• D) configure unique virtual IP addresses

• The correct answer is D: All of the above.

• Snowflake Web Interface (UI): You can create and manage Virtual Warehouses from the UI (resize, suspend/resume settings, etc.).
• SQL commands: You can create and alter warehouses with DDL like CREATE WAREHOUSE and ALTER WAREHOUSE.
• Data integration tools: ETL/ELT tools can create/manage warehouses by connecting to Snowflake and issuing the appropriate commands or using their config to specify a warehouse.

• VMs without NGT: Not clearly a migration blocker on its own; NGT (Nutanix Guest Tools) status isn’t the typical gating factor for live migration during maintenance.
• VMs marked as an Agent: Not a standard, widely-known migration blocker; agents aren’t the typical reason a VM can’t be migrated.
• Memory Overcommitted VMs: While memory pressure can affect placement, memory overcommitment isn’t a fundamental reason a VM would be labeled non-migratable during maintenance.
• VMs with attached Volume Groups: This is the strongest candidate. A Volume Group is a set of volumes bound to a VM; moving the VM would entail relocating and reattaching those volumes, which can complicate or block live migration during maintenance.

• Correct answer: C) After installing ES on the search head(s) and running the distributed configuration management tool.

• ES requires the Splunk_TA_ForIndexes.spl add-on on indexers to apply index-time configurations. It should be deployed via the distributed configuration management (DCM) flow after ES is installed on the search heads, so the indexers receive the proper configuration in a controlled, versioned bundle.

• A) Deploying when adding apps to the deployment server isn’t the ES-specific order; it bypasses the ES-instantiated workflow.
• B) Installing Splunk_TA_ForIndexes.spl first isn’t the recommended order; ES needs to be installed on the search heads first.
• D) It isn’t limited to indexer cluster sites or cluster master commands; the standard flow uses DCM to push the TA to indexers in general.

• Ethical red-teaming is adversarial testing aimed at uncovering weaknesses and potential exploits in an AI system before deployment.
• A (improving accuracy) is not the primary?? of red-teaming.
• B (simulate model risk scenarios) is related but narrower; red-teaming centers on finding vulnerabilities and risk exposure, not just simulating risks.
• D (ensure compliance) is not the main goal of red-teaming.

• A) You can only apply a single template BOM to a service object.

• C) You can modify or delete lines in a BOM template regardless of whether the template has been associated to a service object, or not.

• B) You can apply many template BOMs to a service object — false; typically only one template per service object.
• D) You can modify/delete lines only if not associated — false; you can modify templates even after association (per C).

• Pull: Downloads changes from the central repository and updates the local repository.
• Push: Sends local commits to the central repository.
• Commit: Records local changes in the repository’s history.
• Merge: Combines changes from different branches.
• Clone: Creates a new local copy of a repository.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• Context: You’ve enabled auditing in Dataverse and need to trim audit data to free storage. The question asks which deletion options you can use.

• What the options typically mean:

• About the provided answer (A, C, D): The list includes “by column,” which isn’t a typical or supported way to purge audit data. The more plausible trio is A (by record), B (date range), and C (by table older than date). If the exam expects A, C, D, that seems incorrect or mis-stated in the source.

• Practical takeaway: To reduce audit storage, use per-record deletions, per-table purge by date, and/or date-range deletions as supported by the environment’s audit management UI or admin docs.

• A) MTU mismatch: OSPF neighbors must exchange Hello packets with a compatible MTU. If MTUs differ, the neighbor conversation fails and the adjacency cannot become Full.

• B) Incorrect subnet mask: Routers must be in the same IP subnet on the connected link to form a neighbor relationship. A subnet mismatch prevents Hello packets from being considered valid on the same network.

• D) Area ID not the same: Neighbors must share the same Area ID. A mismatch stops adjacency from forming beyond the 2-Way state.

• E) Different metric set on each end of the link: Cost differences do not prevent OSPF adjacency; they affect routing decisions, not neighbor formation.
• F) Router ID not defined: OSPF can auto-choose a router ID; an undefined ID is not a prerequisite for adjacency to reach Full.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• S3 Versioning stores all versions of an object. If an object is overwritten or deleted, you can recover the previous version using its version ID.
• This protects against accidental deletion or overwriting because the original data remains accessible as an older version.
• How to enable:

• Practical notes:

• S3 Lifecycle rules: automate moving/expiring data, not specifically protection against deletion.
• S3 bucket policies: control access but don’t inherently preserve previous data.
• S3 server-side encryption: protects data at rest, not against deletion/overwrite.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• Help the team identify the causes of delays.
• Encourage continuous improvement through retrospectives.
• Support the team in changing its process, tools, or collaboration methods.
• Help remove impediments that the team cannot resolve independently.

• A: An impediment log may help, but simply maintaining it does not ensure the impediments are resolved.
• B: Directing the team to solutions conflicts with agile self-management.
• C: Adding impediments to the product backlog could delay their resolution and treats them like product features.

• Goal: Guests should not use cameras, but company users can.
• Correct configuration: Guest access settings in the Org-wide settings.

• External access: Controls external-domain communication, not guest capabilities inside Teams.
• Teams settings in Org-wide settings: Too generic; doesn’t specifically target guest capabilities.
• Audio & Video in the default Meeting Policy: Would affect everyone assigned to that policy. To meet the requirement without impacting internal users, you’d need separate policies or guest-specific settings; the exam focuses on the guest-access policy.

• Answer: D: Making business cases for improvement action

• Continual Improvement focuses on identifying and planning improvements and ensuring they’re funded and prioritized. Creating a business case for an improvement action is part of justifying and obtaining support/resources to implement improvements.
• A (Identifying the cause of incidents) aligns with Problem Management.
• B (Authorizing changes) aligns with Change Enablement.
• C (Logging/managing incidents that result in improvement opportunities) aligns with Incident Management, not Continual Improvement.

• The correct answer: B) Synthetic identity theft.

• Synthetic identity theft involves creating a new, forged identity by combining information from multiple real people (e.g., names, dates of birth, SSNs) to commit fraud.
• In the scenario, Adam “created a new identity by obtaining information from different victims,” which matches the idea of synthesizing data to form a fake person.

• Medical identity theft: using someone’s medical information to obtain care or services.
• Tax identity theft: using someone’s personal info to file fraudulent tax returns.
• Social identity theft: impersonating someone to deceive others socially or publicly.

• Look for phrases like “create a new identity” or “combine information from multiple people” to identify synthetic identity theft.

• It is a sequence of distinct phases that flow one after another (requirements ? design ? implementation ? verification ? maintenance).
• Requirements are defined up front and changes are costly; the project often requires formal sign-off before moving to the next phase.
• It emphasizes heavy documentation and minimal iteration after a phase is completed.

• Options:

• Answer: The correct choice is A (800-61r3).

• NIST SP 800-61 Rev. 3 is the dedicated guide for incident handling/response and reflects the latest guidance on the incident response lifecycle (preparation, detection/analysis, containment, eradication, recovery, post-incident activity).
• 800-61r2 is an older revision of the same incident response guide.
• 800-53 covers security and privacy controls, not a specific incident response standard.
• 800-171 focuses on protecting CUI in non-federal systems and networks, not incident response guidance.

• Increase/decrease the number of epochs: Changes how long training runs, but does not reuse a pre-trained model.
• Unsupervised learning: Trains from unlabeled data and does not specifically address adapting an existing model.

• Correct answer: A. Email templates

• Snippets are reusable content blocks that you insert into email content, and they require an email template (or at least an email draft) to render.
• You can store region-specific footers as snippets and include them in a template, but there would be nothing to render the snippet into without a template.
• The other options aren’t prerequisites for using snippets:

• I can’t view the images, so I can’t tell which table is labeled as A in your screenshot. But here’s how to decide:

• How to identify the fact table:

• How to identify the surrogate key in the Patient table:

• Relationship:

• Answer: No (B)

• SaaS (Software as a Service) delivers applications over the internet; you don’t manage the underlying infrastructure or OS.
• Deploying Azure virtual machines requires provisioning and managing virtual machines, OS, updates, and networking—this is classic IaaS (Infrastructure as a Service).
• PaaS is for managed runtime environments (apps hosted on a platform), not for VM deployment.

• Correct answer: Day 3 (Option B)

• Why: In Engagement Studio, when the program is paused, the prospects’ wait times are also paused and do not count down. They resume from the same point when the program restarts. Here, the prospect was at day 3 of a 5-day wait when paused, so they resume on day 3 after the 1-day pause.

• Enable the owner dimension

• Assign a standard costing inventory model

• Batch dimension tracks batches or lots, such as expiration or production batches. It does not identify inventory ownership.
• Moving average is a costing method, but it is not the required choice for this consignment configuration.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• The requirement is a fully managed file server that natively supports Microsoft workloads and file systems and uses the SMB protocol. FSx for Windows File Server is built specifically for Windows workloads, provides native SMB file shares, and supports Windows permissions/Active Directory integration.
• Why the others don’t fit:

• Answer: D. Select an IdP

• Why: To reduce the number of credentials across multiple SaaS apps, implement a single sign-on approach via an Identity Provider. The first step is choosing the IdP; once selected, you can enable SAML (A) or OAuth as supported by apps. Password vaulting (C) is not a true SSO solution, and B is not the foundational step.

• Source: on-premises SQL Server Database1
• Destination: Fabric Warehouse Warehouse1
• Connectivity: on-premises data gateway

• Dataflow Gen1: Primarily for Power Query transformations and isn’t the best Fabric-native choice for this copy operation.
• KQL queryset: Queries data; it does not orchestrate copying from SQL Server.
• Notebook: Could perform custom code-based movement, but it is unnecessary and less direct than a pipeline.