PRINCE2 PRINCE2 Foundation Exam Prep
PRINCE2 Foundation (Page 37 )

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

• Identity provider (IdP): Authenticates users and asserts their identity.
• Service provider (SP): The application being accessed—in this case, Salesforce/the employee portal.
• Identity store: A directory that stores user identities, such as Active Directory.
• Authentication store: A system used to validate credentials.

• The vulnerability scan identifies a vulnerability.
• The administrator verifies that the vulnerability is not present.
• Therefore, the scan produced a false positive.

• True positive: A vulnerability is reported and genuinely exists.
• False negative: A vulnerability exists, but the scan fails to detect it.
• True negative: No vulnerability exists, and the scan correctly reports no issue.

• 255.255.255.128 = /25: 128 total, 126 usable
• 255.255.255.192 = /26: 64 total, 62 usable
• 255.255.255.224 = /27: 32 total, 30 usable
• 255.255.255.240 = /28: 16 total, 14 usable

• One for the network address
• One for the broadcast address

• 8 total addresses
• 6 usable addresses
• Mask: 255.255.255.248

• Data loss prevention (DLP): Helps detect or prevent sensitive data from being copied or transmitted, but it does not primarily protect a stolen laptop’s stored data.
• Operating system hardening: Reduces vulnerabilities and attack surface but does not encrypt files if the device is stolen.
• Boot security: Helps ensure that only trusted software starts, but it does not fully protect the drive if an attacker accesses it offline.

• Advanced Persistent Threat (APT): A sustained, targeted attack campaign or attacker group—not a vulnerability.
• Trojan: Malware disguised as legitimate software.
• Stealthware: A general term for malware designed to avoid detection; it does not specifically mean an unknown vulnerability.

1. Select Exchange email as a location.
2. Use the built-in Azure Storage Account key sensitive information type as the condition.
3. Configure the DLP action to encrypt the email—for example, using Microsoft Purview Message Encryption.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Technology or access methods used outside approved IT processes.

• Prevent connections to malware command-and-control servers
• Identify infected systems making those DNS requests
• Collect information for incident response

• A: Attackers do not normally use sinkholes to map a company’s domain structure.
• B: Redirecting employees from legitimate sites to attacker-owned sites describes malicious DNS manipulation, not a defensive sinkhole.
• D: Attracting attackers away from real resources is more closely associated with a honeypot or deception system.

• Plenum: Describes a fire-resistant cable jacket rating, not a transmission medium or speed.
• Ethernet: Describes a networking technology; Ethernet can use copper or fiber, so the term alone does not identify the fastest cable type.
• DAC (Direct Attach Copper): Uses copper and is typically intended for short-distance, high-speed connections in data centers.

• Create and manage approved IT services as products
• Control which users can deploy those products
• Apply governance, permissions, and constraints
• Use and manage infrastructure-as-code templates, such as AWS CloudFormation templates

• AWS Resource Explorer: Helps find and browse AWS resources; it does not govern IaC deployments.
• AWS Organizations: Manages accounts, consolidated billing, and organization-wide policies.
• AWS Systems Manager: Provides operational management, such as patching, automation, and parameter storage, but it is not primarily used to catalog and govern IaC-based service deployments.

• Honeypots: Decoy systems or services made to attract attackers. Legitimate users should not interact with them, so activity there is a strong indicator of malicious behavior.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system. This can reveal infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens.
• CI/CD: Automates software development, testing, and deployment.
• Threat modeling: Identifies and analyzes potential threats before or during system design.
• Data obfuscation: Makes data harder to understand or interpret.

• Create a CodeCommit repository in the secondary Region.
• Use CodeBuild to run a Git mirror operation from the primary repository to the secondary repository.
• Use EventBridge to detect relevant repository events, such as a pull request being merged.
• Invoke a Lambda function, which starts the CodeBuild project.

• B: Amazon S3 is object storage, not a Git repository that developers can use as a CodeCommit remote.
• C: CodeArtifact is intended for packages and artifacts, not source-code repository mirroring.
• D: An AWS Cloud9 environment is not an appropriate automated replication mechanism and would require manual or persistent infrastructure management.

• B. Versioned configuration files — Infrastructure is defined in machine-readable files and tracked in version control, allowing repeatable provisioning and change history.
• D. Docker files — Assuming “Doctor files” is a typo for Dockerfiles, a Dockerfile declaratively defines how to build a container image and is commonly considered infrastructure/configuration as code.

• A. Cloned virtual machine images — These are prebuilt infrastructure artifacts, but cloning an image is not itself a code-based infrastructure definition.
• C. Change management database records — A CMDB records information about infrastructure; it does not define or provision that infrastructure.

• Ease of exploitation
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and names a specific publicly known vulnerability; it does not measure severity.
• OSINT: Refers to intelligence gathered from publicly available sources.
• SOAR: Automates and coordinates security operations, such as alert response and playbooks.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

• Open or insecure ports
• Enabled legacy or insecure protocols
• Known vulnerabilities and misconfigurations
• Weak services and outdated software

• curl tests web requests and HTTP-based services.
• Wireshark captures and analyzes network traffic; it does not normally scan servers for weaknesses.
• netcat can test connectivity to individual ports and sometimes grab service banners, but it is not a comprehensive vulnerability scanner.

• Azure creates a corresponding service principal in Microsoft Entra ID.
• The identity’s lifecycle is tied to the Azure resource.
• If the resource is deleted, Azure automatically deletes the identity.
• Only the associated resource can use that identity to request tokens.
• You can grant the identity permissions to access services such as Key Vault or Storage without storing credentials in code.

• Existing expected ROI: 15%
• New project ROI: 14%
• Cost of capital: 12%

• Project return = 14%
• Cost of capital = 12%
• It earns 2% more than the cost of capital, so it should increase shareholder value.

• 10 TB with maximum I/O performance: Use EC2 instance store. It provides very high-throughput, low-latency local storage suitable for temporary video-processing data. The application must tolerate data loss because instance store is ephemeral.
• 300 TB of highly durable media: Use Amazon S3, which is designed for highly durable object storage and can scale to this size.
• 900 TB of inactive archival media: Use S3 Glacier, which provides lower-cost storage for data that is rarely accessed.

• A: Amazon EBS offers high performance but is not the best fit for the question’s “maximum possible I/O” requirement compared with local instance store.
• B: Amazon EFS is durable and shared, but is generally more expensive and less suitable for very large archival storage.
• C: Uses EC2 instance store for performance, but incorrectly uses EFS for the 300-TB durable tier and S3 rather than Glacier for archival data.

• B — Reviewing the strategy: Usually performed by a security steering committee or other governance body.
• C — Communicating the strategy: The security manager may help communicate it, but communication is not the primary governance responsibility tested here.
• D — Approving the strategy: Approval belongs to executive management or the appropriate governing authority, not the person who develops it.

text 
ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global 
ip route vrf Customer2 192.168.1.200 255.255.255.255 192.168.1.1 global 
ip route 192.168.1.0 255.255.255.0 Vlan10 
ip route 172.16.1.0 255.255.255.0 Vlan20

• The route in Customer1 VRF provides a path back to the Customer2 subnet, 172.16.1.0/24.
• The route in Customer2 VRF provides a path to the FTP server, 192.168.1.200.
• The keyword global tells the router to resolve the next hop using the global routing table, enabling controlled route leaking between the VRF and global table.
• The global routes identify the VLAN interfaces used to reach each customer network.

• The listener uses a virtual IP address shared by the availability-group replicas.
• Floating IP, also called Direct Server Return (DSR), allows the SQL Server nodes to respond using the listener’s IP address rather than their individual VM IP addresses.
• This is required for the availability-group listener to function correctly with an Azure internal load balancer.

• Replaces the verbal message — this describes non-verbal communication being used instead of words.
• Substitutes for verbal communication — similar; it means communicating without speech.
• Confuses the verbal message — this occurs when non-verbal signals contradict or obscure the spoken message.

• Azure Cosmos DB is a globally distributed NoSQL database service. It stores and retrieves application data, but it does not provide the complete environment for building, testing, and deploying predictive analytics models.
• Azure Machine Learning is the appropriate service for this requirement. It supports creating experiments, training and testing models, and deploying them for predictions.
• Azure Machine Learning Studio provides the browser-based interface for these tasks.

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A sophisticated attack sponsored by a government.
• Shadow IT: Unapproved technology or access methods used by employees.

• Inherent risk: Risk that exists before controls are implemented.
• Avoided risk: Risk eliminated by choosing not to perform the risky activity.
• Operational risk: Risk arising from failures in processes, people, systems, or daily operations.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best tool for scanning uploaded files.
• C. Load balancer: Improves availability and distributes traffic but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may inspect HTTP requests, but malware scanning of uploaded PDFs is the key requirement here.

• IaaS: você gerencia a VM e o sistema operacional.
• PaaS: o Azure gerencia a infraestrutura; você se concentra no aplicativo.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

• Third-party enterprise application with embedded AI: The provider manages most security controls. The customer mainly manages users, data, and configuration.
• Application using an existing third-party FM: The customer controls the application and its inputs/outputs, but the provider controls the underlying model and infrastructure.
• Fine-tuning a third-party FM: The customer has additional responsibility for training data, data protection, and model behavior, but still depends on the provider’s base model and platform.
• Building and training a model from scratch: The customer controls the model, training data, application, deployment, and many security safeguards. This creates the greatest security ownership.

• Each Azure VM must have at least one network interface (NIC).
• A single NIC can have:

• Therefore, each of the five VMs needs only one NIC:

• Reduce the training data: Usually makes overfitting worse.
• Add hyperparameters: Hyperparameters already control training; simply adding them does not solve the problem. Proper tuning could help, but that is not what the option states.
• Increase training time: More training can worsen overfitting if the model is already memorizing the training data.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting responsibility or financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through controls.
• Avoid: Eliminating the activity or condition that creates the risk.

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

• Install unauthorized or unapproved applications
• Access system areas normally restricted
• Add features unavailable in the default software
• Modify the device’s operating system

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects malicious scripts into web pages viewed by users.
• Sideloading: Installs an application from outside the official app store, but it does not necessarily remove the phone’s operating-system restrictions.

• Streams — track change data for tables or views.
• External tables — reference data stored in an external cloud storage location.

• Role — account-level security object.
• Warehouse — account-level compute resource.
• User — account-level security object.
• Share — account-level object used to share data.

• SharePoint search: Finds documents based on search terms, but it does not reliably identify every 32-character account number for DLP enforcement.
• A hunting query in Microsoft 365 Defender: Used for security investigations, not for defining sensitive content in a DLP policy.
• Azure Information Protection: Uses classification and labeling; it does not automatically identify this specific account-number pattern unless configured with a matching sensitive information type.
• RegEx pattern matching: Best suited for structured identifiers with a known format, such as account numbers, employee IDs, or policy numbers.

• 16GB RAM: A 64-bit OS is needed to use more than roughly 4GB effectively, but RAM capacity does not prove the CPU supports 64-bit operation.
• 500GB HDD: Storage capacity has no bearing on OS architecture.
• 1Gbps Ethernet: Network speed is unrelated to CPU architecture.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• Password spraying: Tries a few common passwords against many accounts; no indication of repeated login attempts.
• Remote-access Trojan (RAT): Could install malware, but it does not explain how the attacker obtained the administrator’s credentials.
• Dictionary attack: Tries words or common passwords against an account; again, the scenario specifically highlights Telnet’s lack of encryption.

1. Create a custom Sensitive Information Type (SIT) in the Microsoft Purview portal.
2. Use a regular expression to match the 32-character alphanumeric account number.
3. Reference that SIT in the DLP policy protecting SharePoint Online.

• Format-based data ? custom SIT with RegEx
• Built-in sensitive data ? Microsoft-provided SIT
• Document classification/protection ? sensitivity labels
• Security investigation queries ? Advanced Hunting, not DLP detection

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• A valid input returns the expected result
• An invalid input raises an error
• Boundary values are handled correctly

• B: Copilot may help generate tests, but it does not automatically write all necessary tests.
• C: Writing the implementation does not verify that it works correctly.
• D: Copilot can suggest test commands or test code, but the developer or development environment must execute and validate the tests.

• SAML: Enables federated authentication and single sign-on between the IdP and SaaS providers.
• OAuth tokens: Allow delegated application access; OAuth is not primarily the first step for employee SSO.
• Password vaulting: Stores or autofills multiple passwords but does not eliminate the separate credentials or provide true federation.

• Configure row-level security (RLS) using the sales region and the HR manager’s identity.
• Publish the reports and datasets through a Power BI app.
• Grant the HR managers permission to use the app, but do not add them as workspace members.
• App users can view and interact with reports while RLS limits them to their region.
• They cannot modify the report layout because they do not have workspace editing permissions.

• Adding them to the workspace gives them workspace permissions that may allow report or dataset changes, depending on the assigned role.
• Creating copies is unnecessary and creates maintenance and security problems.
• Hosting datasets and reports in different workspaces does not, by itself, provide the required controlled access.

1. x = -100
2. -100 < x < 100
3. 100 = x < 1000
4. x = 1000

• -500 ? class 1
• 0 ? class 2
• 100 ? class 3
• 1000 ? class 4

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.